Significa que la IP que pingueas para comprobar la puerta no responde a ping.
Esto puede ser debido a caída de la conexión o que el equipo que pingueas tiene alguna forma de protegerse contra ping excesivos.
A verificar ambas cosas...
Disculpe Sr. Bellera, pero me parece que el tema viene por el lado de "perdida de paquetes"
apinger: ALARM: gw_cmts3(192.168.8.3) *** loss ***
Si la IP no respondiera a los Pings, apareceria como "Down"
pinger: ALARM: WAN1GW(1xx.1xx.xx.x) *** down ***
En las opciones avanzadas del GW puedes configurar los parametros de tu preferencia (si dejas todo en blanco, utiliza los parametros por default)
Apinger defaults (/var/etc/apinger.conf):
## "Down" alarm definition.
## This alarm will be fired when target doesn't respond for 30 seconds.
alarm down "down" {
time 10s
}
## "Delay" alarm definition.
## This alarm will be fired when responses are delayed more than 200ms
## it will be canceled, when the delay drops below 100ms
alarm delay "delay" {
delay_low 200ms
delay_high 500ms
}
## "Loss" alarm definition.
## This alarm will be fired when packet loss goes over 20%
## it will be canceled, when the loss drops below 10%
alarm loss "loss" {
percent_low 10
percent_high 20
}
target default {
## How often the probe should be sent
interval 1s
## How many replies should be used to compute average delay
## for controlling "delay" alarms
avg_delay_samples 10
## How many probes should be used to compute average loss
avg_loss_samples 50
## The delay (in samples) after which loss is computed
## without this delays larger than interval would be treated as loss
avg_loss_delay_samples 20
## Names of the alarms that may be generated for the target
alarms "down","delay","loss"
pfSense Forum
