@johnpoz said in VLAN not working what am I doing wrong:
I can draw up how I do it if you want.. But the NVR itself is on its own network/vlan, and then I have a leg into this 10.1.1.0/24 network where I source nat my other networks into.. So I can directly access feed off any camera from my PC with just vlc and a rtsp url, and can also view the feeds off the cameras with some software that runs on my rokus. So any tv in the house I just just turn on the IP Camera channel and see all 3 of my feeds. I can also get my alexa show to show a specific camera feed. But its slower to access than just switch the tv to the channel to see them or click a bookmark on my PC.
That would be awesome if you want to take the time to do that I would appreciate it. I am not new to basic networking but new to VLANs
I have 2 mokerlink managed 9 port switches and 1 Tplink 8 port managed switch
Just so you know what I have:
Proxmox running PFsense. I have the WAN port passed through to PFsense.
the LAN port is setup as a bridge vnet0.
pfsense->mokerlink 2.5g port 6->10gig port (upstairs port 9) ->mokerlink 10gig port (downstairs port 9)-> 2.5g port port 8-> tplink 1g port 6 ->Lorex NVR-> POE IP cameras