Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Brutos

Pages: [1] 2
1
Hardware / Re: PF Sense 2.4 with Asrock J3455-ITX
« on: October 24, 2017, 08:14:30 am »
Just got this board and having the same issue on every reboot I have to start in safemode. I may have to reinstall and try the fix posted

2
Hardware / Re: Unofficial QOTOM Hardware Topic
« on: October 12, 2017, 08:37:49 am »
Has anyone been running pfblockerng or squid/squidguard on their Qotom without issues?
No problems here with pfblockerng, with a bunch of ipv4 lists and DNSBL enabled for ad blocking.

What Qotom box are you running and did you add your own ssd and ram?

3
Hardware / Re: Unofficial QOTOM Hardware Topic
« on: October 08, 2017, 12:39:47 pm »
I have had such bad luck with these Qotom boxes, I bought two back in March J1900 both freeze and lock up if i install pfblockerng or try to add a black list to squidguard.

They work perfectly with sophos and opnsense, so strange. Now I am put off Qotom and I probable will just build a new box instead of buying of of these.

Has anyone been running pfblockerng or squid/squidguard on their Qotom without issues?

4
Hardware / Re: Unofficial QOTOM Hardware Topic
« on: August 09, 2017, 06:29:47 am »
I currently have 2 J1900 boxes from qotom one running sophos in bridge to filter the web traffic and the other running pfsense on the edge.

I was thinking of going for the i3 model with AES however one issue I have experience with both my boxes with i didn't with my custom home build box is whenever i install pfblockerng it crashes both boxes. I have swapped RAM and hardrive to rule each out still the same issue, i never once had this on my custom machine. So now i have to remove pfblockerng which i use to filter my openvpn clients when am on the road which works great.

Anyone experience this at all with current i3 models or previous qotom boxes?

What crash messages do you get? Are you just using the GeoIP rules or are you adding other Blocklists? 

Some blocklists like the FH Lvl1 contain bogons which shouldn't be used for Outbound blocking and can cause issues if used for that purpose.

Hi @BBcan177

So when it crashes it whole system crashes , I lose access to the GUI and if I connect a monitor its a screen full of just random text.
I am only using DNSBL to block ads no other feature is being used, its the best adblocker i have used.
I want to buy another qotom box due to their small footprint and being quiet but scared it will display the same characteristics.
I cant find any other  box with the same characteristics.

5
Hardware / Re: Unofficial QOTOM Hardware Topic
« on: August 08, 2017, 05:32:01 pm »
I currently have 2 J1900 boxes from qotom one running sophos in bridge to filter the web traffic and the other running pfsense on the edge.

I was thinking of going for the i3 model with AES however one issue I have experience with both my boxes with i didn't with my custom home build box is whenever i install pfblockerng it crashes both boxes. I have swapped RAM and hardrive to rule each out still the same issue, i never once had this on my custom machine. So now i have to remove pfblockerng which i use to filter my openvpn clients when am on the road which works great.

Anyone experience this at all with current i3 models or previous qotom boxes?

6
pfBlockerNG / Re: pfBlockerNG v2.0 w/DNSBL
« on: March 02, 2017, 04:41:41 am »
Does anyone have a good list for blocking porn sites please?b

I have google and searched and cant find any.

7
Great will give this a test as i was looking for a way to stop using squid and squidguard

8
pfBlockerNG / Re: pfBlockerNG
« on: June 11, 2016, 04:22:58 pm »
Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.

If an IP is getting blocked, then you can either: 1) Suppress the IP from the Alerts Tab 2) Create a new pfBlockerNG alias (Whitelist), and add the IP to the customlist and set the format to "Permit Outbound". Ensure that the "Rule Order" places the Permit Rules, above the Block/Reject Rules.

If a domain is getting blocked by DNSBL, then you need to suppress it from the Alerts Tab.

Thanks I will try that. :)

9
pfBlockerNG / Re: pfBlockerNG
« on: June 11, 2016, 09:20:11 am »
Hope someone can help I have outbound deny selected on the IPV4 list below

Alias Name   Alias Description   Action   Frequency   Logging
IBlock   pfBlockerNG IBlock   Deny_Outbound   04hours   enabled   
 
PRI1   pfBlockerNG PRI1   Deny_Outbound   01hour   enabled   
 
PRI2   pfBlockerNG PRI2   Deny_Outbound   04hours   enabled   
 
PRI3   pfBlockerNG PRI3   Deny_Outbound   04hours   enabled   
 
SEC1   pfBlockerNG SEC1   Deny_Outbound   04hours   enabled   
 
TOR        pfBlockerNG TOR   Deny_Outbound   04hours   enabled   
 
MAIL   pfBlockerNG MAIL   Deny_Outbound   08hours   enabled   


Now I want to keep all the listed enabled but i keep getting some good sites blocked like dropbox.com.

Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.

10
Cache/Proxy / Re: SquidGuard Crash each time I update blacklist
« on: May 07, 2016, 06:44:10 am »
Thanks Guys for the help working fine now after update no errors. :) :)

11
Cache/Proxy / Re: SquidGuard Crash each time I update blacklist
« on: May 07, 2016, 04:06:14 am »
Same problem for me

Have you found any solutions yet?

12
Cache/Proxy / SquidGuard Crash each time I update blacklist
« on: May 06, 2016, 05:40:58 pm »
Hi,

I hope someone can help me i get this error message each time i update my Squidguard blacklis. Can someone tell me what is happening please?

Thanks




amd64
10.3-RELEASE
FreeBSD 10.3-RELEASE #6 05adf0a(RELENG_2_3_0): Mon Apr 11 18:52:07 CDT 2016     root@ce23-amd64-builder:/builder/pfsense-230/tmp/obj/builder/pfsense-230/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
 PHP Stack trace:
 PHP   1. {main}() /tmp/squidGuard_blacklist_update.sh:0
 PHP   2. sg_reconfigure_blacklist() /tmp/squidGuard_blacklist_update.sh:5
 PHP   3. sg_update_blacklist() /usr/local/pkg/squidguard_configurator.inc:2095
 PHP   4. squidguard_ramdisk() /usr/local/pkg/squidguard_configurator.inc:2131
 PHP   5. mkdir() /usr/local/pkg/squidguard_configurator.inc:1978

13
Installation and Upgrades / Re: 2.2.4 Crashes
« on: August 28, 2015, 06:34:29 am »
I will try that but if i have to end up removing both i may have to switch Firewalls then as web filtering is keep to my setup

14
Installation and Upgrades / 2.2.4 Crashes
« on: August 26, 2015, 07:09:21 am »
Hi,

I hope someone with more experience can assist me with my crashes. I constantly get crashes since 2.2.3 and now 2.2.4 i never got any crashes before.

My setup is
Gigabyte GA-C1037UN-EU
Built in Intel Dual-core Celeron 1037U processor (1.8 GHz)
4gd Ram
squid
dansguardian
bandwidthd
OpenVPN Client Export Utility


15
Hardware / Re: pfSense with Gigabyte GA-J1900N-D3V
« on: August 14, 2015, 02:14:22 pm »
Finally, do you recommend to use GA-C1037UN-EU (rev2) http://es.gigabyte.com/products/page/mb/ga-c1037un-eurev_20/overview/?

Am currently using this board and it works fine no issues at all.

Pages: [1] 2