The pfSense Store

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Gil

Pages: [1] 2 3 4 5 ... 8
1
OpenVPN / Re: Failed to Config OpenVPN on Android
« on: January 15, 2018, 04:55:46 pm »
I have always used OpenVPN Connect without issue, happy to try another app - But what makes it superior?

2
Hardware / Re: cheap and low power VPN supporting pfsense box
« on: January 15, 2018, 04:37:17 pm »
This thread took an interesting turn, thanks for the info.

Regarding APU2 performance, my own testing showed the Bandwidth max was 85.3 Mbits/sec through a TCP OpenVPN connection.
Perhaps a bit slow for the original requirements.


3
Hardware / Re: Looking for small hardware
« on: January 12, 2018, 04:23:11 pm »
PC Engines APU2 can also host LTE cards internally.

https://www.pcengines.ch/apu2.htm

4
Messages from the pfSense Team / Re: QNAP to add pfSense to its products
« on: January 11, 2018, 10:45:50 pm »
Thanks for your detailed response, now no-one needs to make any incorrect assumptions.
 

5
Messages from the pfSense Team / Re: QNAP to add pfSense to its products
« on: January 11, 2018, 08:16:26 pm »
Would that be a commercial edition as a purchased add on;
or are QNAP partnering in pfsense?

6
Hardware / Re: Looking for small hardware
« on: January 11, 2018, 07:28:13 pm »
I have a number of these:

https://comset.com.au/4g-lte-modem-routers-c-65/3g4g4gx-wifi-router-with-sim-card-slot-cm685vw-p-278.html?zenid=f00jrrm70s8ibp7akh5av44ip3

Re-badged for the Australian market & local bands including band 28.

Proroute may sell them in the UK. ?




7
Hardware / Re: Looking for small hardware
« on: January 11, 2018, 05:00:38 pm »
If want the remote end to be a simple firewall protected network with a VPN access;
you can configure an OpenWRT OpenVPN compliant 4G modem to connect to a central (local) pfsense box.
These can then run on a MIPS.


8
Hardware / Re: cheap and low power VPN supporting pfsense box
« on: January 11, 2018, 04:46:35 pm »
Closest new hardware for that cost would be the APU2c4. $USD 130 with a case + shipping - direct from PC Engines. (Not sure about your import rules)
Performance would be in the ball park too - but I you would need to check that for yourself.


9
Hardware / Re: APU2 BIOS
« on: January 11, 2018, 04:27:53 pm »
I received 4 new units last month, all came with 4.0.7.
No issues - no need to experiment further

10
Hardware / Re: Looking for small hardware
« on: January 11, 2018, 04:05:51 pm »
The SG-1000 is about as small as you can get.
I have had some reliability issues with using the OTG port as a 4G modem.
I have setup a couple of Sg-1000's with PocketPort2 interfaces which seems to work well.

11
General Discussion / Re: Platform Pie Chart - Poll
« on: January 11, 2018, 04:03:21 am »
Good idea. I'm quite interested in the results

12
Wireless / Re: Thinking about wireless access points, with storage
« on: January 10, 2018, 09:25:01 pm »
 Does that eeebox PC B202 have enough specs to run FreeNAS?
I thought you need lotsa RAM min 8G.

I am interested as I want to setup a Webdav NAS behind my pfsense.

13
General Discussion / Platform Pie Chart - Poll
« on: January 10, 2018, 07:40:21 pm »
Wondering what is percentage of users are on each variety of paltforms?

a) Netgate appliances
b) Old hardware
c) Purpose built Hardware
d) Virtual
e) Other SBC
f) Other


14
OpenVPN / Re: Current configuration works, new configuration does not
« on: January 10, 2018, 02:57:05 pm »
What did you change in the new config?
Your certs, port numbers, ip addr/ddns must be the same. - if the old exports still work.
Check log files for OpenVPN, increase verbosity if necessary. What do you see & how does it relate to your changes?

15
Captive Portal / Re: Share your Captive Portal Page
« on: January 09, 2018, 08:31:21 pm »
Nice. thanks for sharing

Pages: [1] 2 3 4 5 ... 8