Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - gigli

Pages: [1]
ok, i will reinstall pfsense and restore and get back. I would be great if it could be working, it is a great firewall.

I have used pfsense for a year or so and added i third nic connected to a wireless router (used only as an ap) and there my problems started. I use this connection to stream movies and mythtv content to my macbook and it loose connection with pfsense, this can happen after an hour, after three days, but it always do. I tried another wireless router with the same problem. The last pfsense i tried was 1.2.1-rc3 with the same results. It always required av reboot of the firewall, to reboot the router or macbook didn't do it. I have now tried endian firewall with exact the same setup and it works perfectly, no connection loss in a week, so i guess pfsense is the problem, but i rather use pfsense since it have a few features endian lacks. I don't really remember, but i believe that it only was the connection to my lan that broke not the wan.

System: via mini-itx with dual nics and a third intel nic
wan: dhcp

I don't know is this a bug. I have a pfsense box with tree nics, wan, lan, opt1 connected to a zyxel wireless router only used as a wireless accesspoint. With some of the snapshots of 1.2.1 it got disconnected, on the wireless side, and i have to restart the firewall, this never happened in 1.2. This can happen after 1 h or after 1 day. Another thing is that once or twice my firewall has locked and i cannot connect either by web interface or ssh and with no internet access whatsoever.

Is now using 1.2.1-rc1 build aug 25.

I've upgraded to 1.2.1 via ssh and most of it works, firewall logs in dashboard and iperf does not work. Extra packages i'm using is dns server, squid, phpsysinfo and dashboard. I'm using pfsense mainly as a firewall and dhcp and proxy server, no pptp or vpn.

Hardware / Re: Does it work on EPIA-EK10000G with IDE or SATA disk?
« on: July 07, 2008, 10:42:48 am »
I have a VIA EPIA-EK8000EG and that should be the same card:
and it works with my 2.5" samsung harddrive (ide). Had a lot of troubles at the beginning, but a change of ata-cable solved the problem. It's great with dual nic:s, which works. I have used it with both 1.01, 1.2 and today 1.2.1.

Pages: [1]