Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - yon

Pages: [1] 2 3 4 5
1
2.4 Development Snapshots / Whether to consider adding MPLS functionality
« on: October 08, 2017, 11:23:08 pm »
Whether to consider adding MPLS functionality, eg VPLS. L3 VPN etc.


2
Packages / allow add more ASN in openbgpd
« on: September 24, 2017, 08:41:23 am »
now only openbgpd use an my side Autonomous Systems (AS) Number, why it is can't add more ASN?  i need add more my ASN how do it?
 ???

3
2.4 Development Snapshots / IPv6 gif tunnel interface down
« on: September 16, 2017, 02:40:31 am »
often IPv6 gif tunnel interface down, maybe i find the reason is at /system_advanced_network.php Hardware Checksum Offloading Hardware TCP Segmentation Offloading Hardware Large Receive Offloading

These three options are set to influence. Sometimes arbitrarily adjust these three options, IPV6 to work . But not fixed some options IPv6 work.

4
2.4 Development Snapshots / services_dyndns not work
« on: September 15, 2017, 08:02:51 am »
services_dyndns not work  all no update

2.4.0-RC (amd64)
built on Thu Sep 14 22:15:51 CDT 2017
FreeBSD 11.0-RELEASE-p12

5
Routing and Multi WAN / where GRE service ?
« on: September 13, 2017, 11:55:56 am »
i can't find GRE service, where it is ?  ???


6
2.4 Development Snapshots / ipv6 down
« on: August 28, 2017, 05:28:36 pm »
2.4.0-RC (amd64)
built on Mon Aug 28 11:05:02 CDT 2017

ipv6 down he.net tunnel online but v6 network not work.  windows tracert v6 address show 1231 wrong.

7
General Discussion / who can offer internet ip transit?
« on: August 25, 2017, 10:56:36 am »
because we here internet by govement blocked. so who know can offer internet ip transit and offer fixed ips ? of cause need fastest and stable bandwith to me.  :P

8
2.4 Development Snapshots / squid not normal work update to new verison
« on: August 22, 2017, 02:56:37 pm »

today udate pf to the new verison , then squid just not normal work. how i do fix it ?
2.4.1-DEVELOPMENT (amd64)
built on Tue Aug 22 12:41:22 CDT 2017


9
2.4 Development Snapshots / Default deny rule IPv4 (1000000103)
« on: August 09, 2017, 04:36:51 am »
why it has this rule ? how i edit it?

Default deny rule IPv4 (1000000103)
Default deny rule IPv6 (1000000105)

10
2.4 Development Snapshots / Operation timed out
« on: August 01, 2017, 03:25:41 am »
i have try update many versions always fail.


>>> Updating repositories metadata...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
>>> Unlocking package pfSense-kernel-pfSense... done.
>>> Downloading upgrade packages...
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Checking for upgrades (9 candidates): ......... done
Processing candidates (9 candidates): ......... done
The following 8 package(s) will be affected (of 0 checked):

Installed packages to be UPGRADED:
   strongswan: 5.5.2_1 -> 5.5.3 [pfSense]
   php56-pfSense-module: 0.45 -> 0.47 [pfSense]
   pfSense-rc: 2.4.0.b.20170722.0215 -> 2.4.0.b.20170731.1917 [pfSense-core]
   pfSense-kernel-pfSense: 2.4.0.b.20170722.0215 -> 2.4.0.b.20170731.1917 [pfSense-core]
   pfSense-default-config: 2.4.0.b.20170722.0215 -> 2.4.0.b.20170731.1917 [pfSense-core]
   pfSense-base: 2.4.0.b.20170722.0215 -> 2.4.0.b.20170731.1917 [pfSense-core]
   pfSense: 2.4.0.b.20170721.1400 -> 2.4.0.b.20170731.1405 [pfSense]
   ldns: 1.7.0 -> 1.7.0_1 [pfSense]

Number of packages to be upgraded: 8

The operation will free 3 MiB.
51 MiB to be downloaded.
[1/8] Fetching pfSense-kernel-pfSense-2.4.0.b.20170731.1917.txz: . done
pkg: https://beta.pfsense.org/packages/pfSense_master_amd64-core/All/pfSense-kernel-pfSense-2.4.0.b.20170731.1917.txz: Operation timed out
>>> Locking package pfSense-kernel-pfSense... done.
Failed

11
2.4 Development Snapshots / ICMP Unreachable packet received
« on: June 28, 2017, 01:47:54 pm »
who can tell me why dns can't send ICMP data ?  PF had been setup allow all ICMP in firewall rule.  :-\

02:43:24   Sending Notify request to 2001:470:600::2 for yu.net [2017062909] 5th attempt
02:43:24   Sending Notify request to 216.218.133.2 for yu.net [2017062909] 5th attempt
02:43:24   ICMP Unreachable packet received

12
i start uninstall suricata package then system down.

13
2.4 Development Snapshots / DHCP dont work in the second LAN
« on: June 07, 2017, 12:15:07 am »
DHCP dont work in the second LAN. 2.4.0-BETA (amd64) built on Tue Jun 06 07:32:29 CDT 2017

the second LAN for dn42.net network , i want to lan auto get ip. but the second lan dhcp dont work in this vrsion.

14
i am using  SAUMANG SATA3 SSD 120G, when i use USB disk image for install , SSD AHCI  mode no find the SSD disk. only use ide mode sometime find the SSD. often PFsense can't find any mode the SATA SSD disk.  i try using lastest verson PF v2.4 version still not work.

 

15
Packages / Secure Tunnel
« on: May 08, 2017, 06:57:31 pm »
How i do config the Secure Tunnel ? such as i want to do SSL to my dns server

my dns server in LAN ip is : 192.188.101.5
i have ipv4 WAN  and IPV6 wan



General Options
Description
Enter a description for this redirection.
Client Mode Use client mode for this tunnel (i.e. connect to an SSL server, do not act as an SSL server).
Listen on IP
Enter the local IP address to bind this redirection to.
Listen on Port
Enter the local port to bind this redirection to.
Certificate
Select server certificate to use for this tunnel.
Redirects to IP
Enter the IP address to redirect this to.
Redirects to Port
Enter the port to redirect to.
Outgoing Source IP
Enter the source IP address for outgoing connections.

Pages: [1] 2 3 4 5