pfSense Support Subscription

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - clugo633

Pages: [1]
1
Official pfSense Hardware / Upgrade storage on sg3100
« on: December 28, 2017, 09:21:48 pm »
Anyone know to upgrade/install m2 SATA on sg3100?

Thanks

2
Official pfSense Hardware / Netgate sg3100 & netmap
« on: December 27, 2017, 09:03:52 am »
Does the sg3100 support netmap?  I can't find much online about their opt port which I'm using as my lan port.

Thanks

3
Official pfSense Hardware / SG-3100-questions
« on: December 26, 2017, 09:09:50 pm »
Ive had my 3100 for about a month and for the most part its doing its job well.  However, for the past couple of days Ive been trying various packages; Suricata, squid and squidguard. I abandoned squid and squidguard due to performance issues (the internet was behaving to slow) and suricata wouldnt run due to not enough resources (avail ram, only 2gb on 3100).  I used to run a vm pfsense on a 1u supermicro running an i3 with 16gb of ram..totally overkill but what i had.  Ive sense repurposed that machine as a ubiquity servers to run the controller and NVR.  I could switch back but I want to give the 3100 as much of a chance as possible. 

So I was wondering if anyone else was running squid and suricata on a 3100?  If so, what has been your experience?  Are you using legacy or inline? 

Any else concerned with the low ram amount?  I feel like 4gb should be the min to run these apps well.

Thanks.

4
Hello.  Im a newbie to pfsense and have been doing a ton of reading into the issue I was having.  Below is my setup:

SM X10SLV-Q
i3-4160
8gb Crucial memory
30gb Intel msata

When installing 2.2.2 via USB we would get the blue screen and it would get stuck in "waiting for backend" message.  We disable various setting in the bios with the same outcome.  We tried the same with version 2.2.1 with the same outcome.  It wasn't till we switched from AHCI to IDE that we were able to complete the install. 

Any thoughts?  How will pfsense differ when configure AHCI vs IDE?

Thanks for your help. 

5
Hardware / New build-Drive and NIC recommendations
« on: April 27, 2015, 02:08:32 pm »
I'm expecting parts to begin arrive tomorrow for my new pfsense build. 

-X10SLV-Q-O Mini ITX Server Motherboard

-i3-4160 processor
-4gb crucial or hynix memory

What I haven't purchased yet is a drive (msata or ssd) and I'm considering adding a dual nic card. 

I'm looking for recommendations. 

Which is the better drive; msata or ssd? 

Dual NIC card recommendations?

Thanks,

6
Hardware / AMD GX-420 vs Intel Atom
« on: April 21, 2015, 09:22:16 pm »
Which processor would work best?

Either would go on a super micro mini it mobo. 

AMD:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813182957&cm_re=supermicro_mini_itx-_-13-182-957-_-Product

Intel Atom N2800 1.86GHz:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813182848&cm_re=supermicro_mini_itx-_-13-182-848-_-Product

Theres also this open box one that I can add a cpu to.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813182854R&cm_re=supermicro_mini_itx-_-13-182-854R-_-Product

Let me know what you guys think.  I'd like to order asap, if possible.  Thx.

7
Hardware / New Build Help
« on: April 21, 2015, 04:23:19 pm »
Hello.  I'm new to pfSense but am excited to learn and build my own box.  I've been reading everywhere possible and would like some opinions.

My usage:
-home router
-firewall
-OpenVPN
-couple of packages but nothing overly sophisticated

I have a FreeNas server I'd like to access from the outside.  Multiple Windows and Apple machines. 

I've looked at the following:
Intel Atom D2550 all in one, see below
- http://www.newegg.com/Product/Product.aspx?Item=N82E16856205007

-building my own using the Intel Atom D2500CCE and other parts from Amazon
http://www.amazon.com/dp/B006ICQ3FK/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=C0764DXST82H&coliid=IQ80EDTB610PK

-I've also looked at other setups using J1900, and other Celeron processor. 

My fear with most of the above are the reviews.  Some are Ok but not powerful enough; get too hot, don't work because of various ACPI issues, etc...

I would like to build something that is powerful enough but not very expensive that I can just buy the one at the sense store. 

I'd could use some help on mobo that work and processors. 

I like this mobo but am open to suggestions.    http://www.newegg.com/Product/Product.aspx?Item=N82E16813182252R

Again, I know you don't have to spend a lot of money to get a quality router for home but I need some help.

Thanks in advance. 

-

Pages: [1]