Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - learnin9

Pages: [1]
Chinese / 中国版区的第一个帖子
« on: August 21, 2013, 05:43:42 am »
  希望大家能遵守规则发帖,讨论pfsense问题。 :) :)

General Questions / About the netmap,The high packet rates driver
« on: December 02, 2012, 08:39:49 am »
Project summary
The high packet rates of today's high speed interfaces (up to 14.88 Mpps on 10 GigE interfaces) make it very difficult to do software packet processing at wire rate. An important reason is that the APIs and software architecture that we use is the same we had 20-30 years ago when "fast" was 1000 times slower.
netmap is a very efficient framework for line-rate raw packet I/O from user space, which is capable to support 14.88Mpps on an ordinary PC and OS. Netmap integrates some known ideas into a novel, robust and easy to use framework that is available on FreeBSD and Linux without the need of special hardware or proprietary software.
With netmap, it takes as little as 60-65 clock cycles to move one packet between the user program and the wire. As an example, a single core running at 900 MHz can generate the 14.8 Mpps that saturate a 10 GigE interface. This is a 10-20x improvement over the use of a standard device driver.
The rest of this page gives a high level description of the project.
Transplant to pfsense?

I upgraded the PFsense 2.0 RC1 system, when the system finished rebooting,I found that the file system is not a read-only system,why?
[2.0-RC1][root@pfSense.localdomain]/root(20): mount
/dev/ufs/pfsense0 on / (ufs, local)
devfs on /dev (devfs, local)
/dev/md0 on /tmp (ufs, local)
/dev/md1 on /var (ufs, local)
/dev/ufs/cf on /cf (ufs, local)

1:login the webGUI,and make "enable serial" from the sytsem-->advanced menu
2:find the "<enableserial/>" from the /cf/conf/config.xml
3:vi /etc/platform file and modify the file as "embedded"
4:reboot the system
5:I can not find the "enable serial" from the system--->advanced menu
6:I submit button again the  system--->advanced menu
7:"<enableserial/>" was Disappeared from /cf/conf/config.xml file
8: reboot system, I found the log messages screen from the VGA

Pages: [1]