pfSense Support Subscription

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - craigpf

Pages: [1]
1
Official pfSense Hardware / SG-3100 Reloading
« on: December 11, 2017, 07:12:39 pm »
My SG-3100 is stuck and it can't get up! 

Here is the sequence of events I'm seeing:
 
Press reset button
First LED blinks blue rapidly
First and second LED blinks blue rapidly
First, second and third LED blink blue rapidly
They all go dark
Sequence repeats

I can get on the console but I'm unable to decipher its output such that I can unhinge the death spiral...

2
Official pfSense Hardware / SG-3100
« on: December 04, 2017, 07:08:26 pm »
Hi, I'm unsuccessfully trying to get into Netgate SG-3100.  I'm clearly doing something stupid, just not sure what.  Here's sequence of events:

* Nothing connected to Netgate SG-3100.  Cycle power, wait for diamond LED to pulse
* Hold reset button 10 seconds, wait for diamond LED to pulse
* PC configured for DHCP
* Connect PC to Netgate port LAN 1 with known good cable
    * ipconfig shows IP address assigned to PC as 169.254.8.53
    * Arp -a shows nothing for Netgate, only
        * 169.254.255.255, and
        * Local addresses (224.0.0.x, etc)
* Change PC IP address to static 192.169.1.37, via control panel/properties
    * No change to arp table, no connection to netgate
    * Change PC back to DHCP
* Change to Netgate port LAN2
    * No change

Pages: [1]