Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - lars314

Pages: [1]
1
General Questions / Re: Vm-network conecting to home network
« on: January 07, 2018, 12:15:02 pm »
The requested img...


2
General Questions / Re: Vm-network conecting to home network
« on: January 06, 2018, 07:20:27 am »
I did turn off the NAT function, but know i not able to ping like you sad.
so think we need some Firewall rules ?



My goal is to use MS WDS // MDT for study  :)

3
General Questions / Re: Vm-network conecting to home network
« on: January 03, 2018, 01:10:15 pm »
Edit: Did some ping test with CMD and from the 10.0.0.1 network i'am able to ping all IP's on my home network...

other way i'am not home to vm-network...


do i need to turn on (see last attachment) i have read some thing about it but i didnt total understant it.... sorry still a noob  :-[
##############################################################################

Under Firewall/NAT

Port Forward // 1:1 // Outbound // NPt

they are empty

Here some screens

hoop you can read them :)


Sorry not sure on witch page to add the rule

4
General Questions / Re: Vm-network conecting to home network
« on: January 02, 2018, 07:08:11 pm »
Sorry is a typo needs to be 10.0.0.100

10.0.0.100 vm cliŽnt Windows server 2012 R2 assigned by DHCP on LAN..

And gived a fix ip to WAN of 192.168.0.3 stil outsite of my DHCP of my Home Network.

Becauce 192.168.0.2 was used..

5
General Questions / Re: Vm-network conecting to home network
« on: January 02, 2018, 05:50:45 pm »
oke status update:

removed the upstream on LAN and added DNS 8.8.8.8 & 8.8.4.4 and default gateway 10.0.0.1 under services/ DHCP Server / LAN
 

Server: can ping to 192.168.0.100 (with CMD of MS)

workstation: cant ping to 192.168.1.100 (with CMD of MS)

i think i need some help with where to make the rules  :-[

but we made some progress.... :D



--- off topic---

I resetted pfsense to factory default no worry i made a snap :P
and i found out that by default i able to ping both ways.. so was trying to found out why .... but did not find any.... :(


6
General Questions / Re: Vm-network conecting to home network
« on: January 02, 2018, 04:08:01 pm »
oke did is what i did:

Wan: 192.168.0.3/24 -
upstream: 192.168.0.1


Lan: 10.0.0.1/24
Upstream: 10.0.0.1
DHCP: 10.0.0.100 t/m 10.0.0.254

when i try on my server go to internet i get the message DNS not be found.
but got no yellow mark on my network icon.. :) so that is a good thing..

can tell we close to internet :P

Edit: if i give my server fix ip with DNS 8.8.8.8 and 8.8.4.4 internet is working
but i can ping 192.168.0.1 but i cant ping 192.168.0.100 (my workstation)

if i use: Diagnostics /ping and ping 192.168.0.100 it works <-- need firewall rule ?


7
General Questions / Re: Vm-network conecting to home network
« on: January 02, 2018, 03:59:49 pm »
how about the ustream for my LAN 10.0.0.1 do i need that one 2 ?

8
General Questions / Re: Vm-network conecting to home network
« on: January 02, 2018, 11:03:14 am »
do i need to fil in upstreamgateway for my WAN en LAN 192.168.0.1 & 10.0.0.1 ??

9
General Questions / Re: Vm-network conecting to home network
« on: January 01, 2018, 04:35:43 pm »
Quote
2. Set a static IP on your pfSense "WAN" from your main network but outside your DHCP range.

Like?

192.168.0.2 because my dhcp on my TP-link start by 192.168.0.100


10
General Questions / Re: Vm-network conecting to home network
« on: January 01, 2018, 04:05:12 pm »
The other thing you can do, is run the Virtual pfSense router as your main router, then just use the TP-Link as an access point. the big downside to that is, if your ESXi goes down so does your internet/network. You have to setup auto-start for the pfSense router VM and be extremely careful about how you change settings.

i want to but i know nothing about pfsense and if i .... it up i have no internet ... :'(

11
General Questions / Re: Vm-network conecting to home network
« on: January 01, 2018, 04:02:49 pm »
The VMware part looks good. The thing your missing is that you need to disable NAT on pfSense.

I looked up your TP-Link and it supports static routes so this is "easy". Here are some general steps:

1. Disable NAT on pfSense
2. Set a static IP on your pfSense "WAN" from your main network but outside your DHCP range.
2. On the TP-Link add a route to 10.0.0.0/24 via the IP you set on pfSense WAN (assuming your only using 10.0.0.1-10.0.0.254)
3. Add firewall rules to pfSense as needed to allow traffic from your main LAN to your pfSense LAN (10.0.0.0/24)

I'm not sure about internet access for you pfSense LAN though as the TP-Link may not NAT the extra network. I would advise getting a physical pfSense router. That way you can have all the networks "on" that physical router and have full control over NAT. That's how I do it at home and just extend the all the extra networks into ESXi via VLANs.

oke i try this thanks let you if it works :D

12
General Questions / Vm-network conecting to home network
« on: January 01, 2018, 02:58:54 pm »
Hi Guys,

I new with all this pfsense stuff, and it give me a headache... i tried a couple of times but what i do it want work :(

what try to do:

 
Home network 192.168.0.x (TP-LINK Archer C7 v1)
Vm-network  10.0.0.x (LAN site of pfSense box)

what i have is a server running esxi 6.0.x with a default setup pfsence box..

WAN to my home network & my LAN with DHCP to 10.0.0.x

on my LAN site i have client Win8.1 and everything is working the machine is able to go to internet..
but i also have synology NAS on my home network with all my files and  i like to acccess this files with my vm-client...

can you guys tell me what i have to do to get access to my files?

i know i have to make a route, i tried did not work :(

see attachment for network in vm

i found kinda some topic...
https://forum.pfsense.org/index.php?topic=142131.15

Pages: [1]