Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jotape956

Pages: [1]
1
Installation and Upgrades / Re: Kernel Panic error while installing
« on: February 15, 2018, 09:03:48 am »
Quote
It's just crappy hardware, replace it.
I think that's what I'll end up doing...

Although it is not really a defective hardware as I'm able to install no matter which other OS, that's what concerns me.

2
Installation and Upgrades / Re: Kernel Panic error while installing
« on: February 15, 2018, 07:27:06 am »
Update:

I reset the bios yesterday and I was finally able to install pfSense.

The box came with a small M.2 SSD which I replaced to a sata SSD in one of my attempts to make it work. I was getting the same error on both SSDs.

Now that I had pfSense installed in my sata SSD I thought that I could put back again the M.2 SSD that the box came with and try to install it there, after all, what solved my issue was resetting the bios.

I tried the M.2 SSD and got the kernel panic issue again, reset the bios and tried again but still the same error. I put back the SSD which had pfSense installed and I'm still getting the kernel panic issue, even after resetting the bios! :(

Any ideas of what it could be will be appreciated.

3
Installation and Upgrades / Re: Kernel Panic error while installing
« on: February 13, 2018, 07:23:38 am »
Quote
Where did you buy this box
This is a Qotom box that I bought for testing purposes.

This is the one that I got: https://goo.gl/Kns8ER

4
Installation and Upgrades / Re: Kernel Panic error while installing
« on: February 12, 2018, 07:59:38 am »
"What version of pfSense was it previously running?" I'm not sure but definitely one of the latest ones.
"What version are you trying to install now?" I've tried 2.1, 2.3.5 and 2.4.2

After running bt at the db> prompt I get:
db> bt
Tracing pid 0 tid 100000 td 0xffffffff81391dd0
kdb_enter() at kdb_enter+0x3b
panic() at panic+0x180
interrupt_trigger() at interrupt_trigger+0x3e
madt_parse_ints() at madt_parse_ints+0x1cd
acpi_walk_subtables() at acpi_walk_subtables+0x29
madt_setup_io() at madt_setup_io+0x32
apic_setup_io() at apic_setup_io+0x13
mi_startup() at mi_startup+0x77
btext() at btext+0x2c
db>

5
Installation and Upgrades / Re: Kernel Panic error while installing
« on: February 12, 2018, 05:22:10 am »
Hardware:
  • Intel Core i5-5250U 1.6GHz
  • Tigo 4GB DDR3L 1600
  • Wifi: Atheros AR9287
  • 60GB Corsair Force GT SSD
This is a small box that I bought with pfSense installed. I wanted to try other OS in order to make the best decision on which Firewall OS to use.

I installed Sophos and it worked properly. I tried to reinstall pfSense and that's where I'm stuck.

6
Installation and Upgrades / Re: Kernel Panic error while installing
« on: February 12, 2018, 02:54:45 am »
Thank you for your answer but I've already tried and it works without a problem.

Seems like my hardware does not like pfSense only :(

7
Installation and Upgrades / Kernel Panic error while installing
« on: February 09, 2018, 03:26:46 am »
I am having issues installing pfSense. I've tried multiple versions already.

When I run the installer everything seems alright but in the middle of it I get:

Panic: Bogus interrupt trigger mode
KDB: enter: panic
Stopped at kdb_enter+0x3b : movq
db>


I've also tried installing it using both, a CD and a USB stick as I've experienced before some OS that can only be installed using a CD.

I don't believe this is a hardware issue because I've run some stress tests and had no problems with them.

I am also able to install other OS using the same hardware.

Has anyone had the same problem before and how did you manage to go through?


jotape956

Pages: [1]