Netgate SG-1000 microFirewall

Author Topic: 2.2.6 -> 2.3.2 virtual ip / 1:1nat broken?  (Read 404 times)

0 Members and 1 Guest are viewing this topic.

Offline gonesilent

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-2
    • View Profile
2.2.6 -> 2.3.2 virtual ip / 1:1nat broken?
« on: July 27, 2016, 09:01:08 pm »
Did a fresh install to new hardware of 2.3.2, restored 2.2.6 config. Reassigned WAN/LAN nics, rebooted. None of my virtual ip's are working with the 1:1 nat. I cleared my switch config made sure all macs got flushed. I am seeing this problem on two different boxes. Can get out fine via WAN but none of the 1:1 / virtual IP's can get out or in.

Has anyone run into trouble with virtual IP /1:1 nat?

Offline cmb

  • Hero Member
  • *****
  • Posts: 11226
  • Karma: +896/-7
    • View Profile
    • Chris Buechler
Re: 2.2.6 -> 2.3.2 virtual ip / 1:1nat broken?
« Reply #1 on: July 27, 2016, 09:02:30 pm »
VIPs and 1:1 NAT definitely all work fine. Packet capture, see if the traffic is coming into your WAN at all. I'm guessing it's not, and you're not seeing any ARP requests on those IPs, likely because of upstream ARP cache on your ISP's router.