Netgate SG-1000 microFirewall

Author Topic: Wan and Lan Failover  (Read 345 times)

0 Members and 1 Guest are viewing this topic.

Offline tomli

  • Jr. Member
  • **
  • Posts: 61
  • Karma: +0/-0
    • View Profile
Wan and Lan Failover
« on: February 17, 2017, 01:21:52 am »
Hi All,

We have two PFsense firewall for HA purpose. In normal status, PFsense A is the active firewall and PFsense B is standby firewall. We found that the PFsense A connect to switch (Wan) cable was broken, PFsense B connect to switch (Wan) will be activate. However, PFsense B connect to switch (Lan) is still standby. Therefore, Client still cannot go to the internet. We need to power off the PFsense A, then PFsense B all interface will be activated. Client can go to the internet. Can we configure the PFsense B to change to active after it detect PFsnse A have issue in WAN interface? Please advise.