@xokia said in VLAN not working what am I doing wrong:
PFsense is not directly connected to any of these ports.
Doesn't matter what is upstream, pfsense and other switch..
network --- 1U,23T -- switch -- 23U -- device.
I have a lorex NVR (N847A6) and 3 cameras (E893AB) that are on the network behind the nvr wired poe.. You understand this a different L2 network, you will not be able to directly access the cameras from any of your other network without a little trickery..
My NVR is on its own vlan off of pfsense, 192.168.110.0/24, but the cameras are on a different network provided by NVR 10.1.1.0/24
You won't be able to directly access the cameras without putting a leg of pfsense into this network behind the NVR.
I can draw up how I do it if you want.. But the NVR itself is on its own network/vlan, and then I have a leg into this 10.1.1.0/24 network where I source nat my other networks into.. So I can directly access feed off any camera from my PC with just vlc and a rtsp url, and can also view the feeds off the cameras with some software that runs on my rokus.