Netgate SG-1000 microFirewall

Author Topic: ALTQ missing on interface...what to do?  (Read 229 times)

0 Members and 1 Guest are viewing this topic.

Offline pleco

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
ALTQ missing on interface...what to do?
« on: October 20, 2017, 11:47:10 pm »
When trying to run the Traffic Shaping Wizard I get:

"This firewall does not have any LAN-type interfaces assigned that are capable of using ALTQ traffic shaping."

The network card is (from sysctl dev.em.1)

dev.em.1.%pnpinfo: vendor=0x8086 device=0x105e subvendor=0x8086 subdevice=0x115e class=0x020000
dev.em.1.%location: slot=0 function=1 dbsf=pci0:2:0:1
dev.em.1.%driver: em
dev.em.1.%desc: Intel(R) PRO/1000 Network Connection 7.6.1-k

Is ALTQ truly not supporting this NIC?

Offline Grimson

  • Full Member
  • ***
  • Posts: 185
  • Karma: +26/-2
    • View Profile
Re: ALTQ missing on interface...what to do?
« Reply #1 on: October 21, 2017, 04:56:06 am »
Is your lan on a bridge interface?

Offline pleco

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: ALTQ missing on interface...what to do?
« Reply #2 on: October 21, 2017, 09:07:50 am »
No.  I do have 3 VLANs setup on it.