pfSense Support Subscription

Author Topic: IpSec VPN NAT port 80  (Read 100 times)

0 Members and 1 Guest are viewing this topic.

Offline selcukpeksen

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
IpSec VPN NAT port 80
« on: November 02, 2017, 02:06:56 am »
Hello.
I have built IPSec vpn between the center and the factory. There are PfSense on both tarmt. 2.3.2-RELEASE-p1 (amd64)

Headquarters: 170.170.70.0/24
Factory: 10.0.0.0/16 structure.

When I want to go to the port side of a rope 80 on the factory side by the center, VDSL is trying to get out with VDSL.
But there is no problem when I want to go to port 443 of the same ipn in the factory. Could this cause problems?

Central client ip: 170.170.70.87
factory client ip: 10.0.0.142

Below is a log view explaining the situation.


Lan Rule Tablom: