pfSense Gold Subscription

Author Topic: load average increase after update  (Read 87 times)

0 Members and 1 Guest are viewing this topic.

Offline latimeria

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
load average increase after update
« on: November 11, 2017, 10:13:09 am »
Hello,
I noticed the load average increased and it's always over 1 after last upgrade to 2.4.1 version; before upgrade it was 0.0x
can you suggest how to check what's going wrong?
Thanks
Quote
last pid: 10531;  load averages:  1.17,  1.36,  1.32  up 0+01:06:34    17:12:22
143 processes: 5 running, 117 sleeping, 21 waiting

Mem: 60M Active, 60M Inact, 188M Wired, 17M Buf, 7403M Free
Swap: 16G Total, 16G Free


  PID USERNAME PRI NICE   SIZE    RES STATE   C   TIME    WCPU COMMAND
   11 root     155 ki31     0K    64K CPU3    3  65:36 100.00% [idle{idle: cpu3}]
   11 root     155 ki31     0K    64K CPU1    1  65:27 100.00% [idle{idle: cpu1}]
   11 root     155 ki31     0K    64K RUN     0  65:26 100.00% [idle{idle: cpu0}]
   11 root     155 ki31     0K    64K CPU2    2  65:22 100.00% [idle{idle: cpu2}]
 4505 root      52    0   263M 38124K piperd  0   0:00   1.46% php-fpm: pool nginx (php-fpm)
    0 root     -16    -     0K   368K swapin  0   0:34   0.00% [kernel{swapper}]
   12 root     -60    -     0K   336K WAIT    2   0:03   0.00% [intr{swi4: clock (0)}]
   17 root     -16    -     0K    16K -       3   0:02   0.00% [rand_harvestq]
73707 uucp      20    0 14876K  2800K nanslp  2   0:02   0.00% /usr/local/libexec/nut/riello_usb -a IDG40
26082 root      20    0 37704K  9108K kqread  2   0:01   0.00% nginx: worker process (nginx)
42417 root      52   20 13084K  2588K wait    3   0:01   0.00% /bin/sh /var/db/rrd/updaterrd.sh
    0 root       8    -     0K   368K -       2   0:01   0.00% [kernel{thread taskq}]
   15 root     -76    -     0K    80K -       1   0:01   0.00% [usb{usbus0}]
   12 root     -88    -     0K   336K WAIT    2   0:01   0.00% [intr{irq271: xhci0}]
   16 root     -16    -     0K    16K pftm    0   0:01   0.00% [pf purge]
    0 root     -92    -     0K   368K -       0   0:01   0.00% [kernel{em3 que}]
    0 root     -92    -     0K   368K -       1   0:01   0.00% [kernel{em0 que}]
21909 unbound   20    0 72924K 26584K kqread  2   0:01   0.00% /usr/local/sbin/unbound -c /var/unbound/un

BlueKobold

  • Guest
Re: load average increase after update
« Reply #1 on: November 11, 2017, 02:00:10 pm »
Quote
I noticed the load average increased and it's always over 1 after last upgrade to 2.4.1 version
From witch version you were upgrading to the version 2.4.1? From 2.3.x or 2.4.0 to 2.4.1 or was it from an earlier
version?

What do you think about a fresh and full install? It takes mostly much less time and is then on top of this
more smooth and liquid running. You can fairly backup oyur configuration and reload it then later.

Offline latimeria

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: load average increase after update
« Reply #2 on: November 11, 2017, 02:23:05 pm »
2.4.0 to 2.4.1
But originally it was 2.3 and up to 2.4.0 no problems. I just have openvpn client to connect to PIA VPN