Netgate SG-1000 microFirewall

Author Topic: Traffic Shaping  (Read 463 times)

0 Members and 1 Guest are viewing this topic.

Offline Havok

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Traffic Shaping
« on: December 30, 2017, 05:56:39 am »
Noob question

I don't have much for DL/UP speeds but I did use traffic shaping for my web sites and yes it did seem to help. But I'm a old timer and have run a BBS going back to 94 and not my telnet port has lag, is there any easy way to add port 23 to traffic shaping to Higher Priority?

Thanks before hand


Offline KOM

  • Hero Member
  • *****
  • Posts: 5820
  • Karma: +710/-23
    • View Profile
Re: Traffic Shaping
« Reply #1 on: January 02, 2018, 10:01:10 am »
"Easy" is a relative term.  Provide some details of the shaper you chose (PRIQ, HFSC, FAIRQ etc) and how you have configured it for anyone to help you.

Offline Havok

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Traffic Shaping
« Reply #2 on: January 07, 2018, 06:42:03 am »

Hello thanks for the reply, have not been around due to the flu!

Guess I need pfSense for Dummies

About all I know it I did the shaping through the tab Firewalls and then clicking Traffic Shaping the only thing I set was my download and upload speeds and the setting HTTP to a higher priority on the dedicated link

Hope this helps some, thanks















Offline Nullity

  • Hero Member
  • *****
  • Posts: 980
  • Karma: +99/-9
    • View Profile
Re: Traffic Shaping
« Reply #3 on: January 07, 2018, 03:54:51 pm »

Hello thanks for the reply, have not been around due to the flu!

Guess I need pfSense for Dummies

About all I know it I did the shaping through the tab Firewalls and then clicking Traffic Shaping the only thing I set was my download and upload speeds and the setting HTTP to a higher priority on the dedicated link

Hope this helps some, thanks

Read the pfSense wiki. After some learning, struggling, and trial & error experimentation, return to tell us how we can help you.

I do not envy experiencing the pfSense learning-curve... but, we are happy to help after you've felt our pain. :)
Please correct any obvious misinformation in my posts.
-Not a professional; an arrogant ignoramous.

Offline Havok

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Traffic Shaping
« Reply #4 on: January 09, 2018, 08:37:57 am »





Quote

Read the pfSense wiki. After some learning, struggling, and trial & error experimentation, return to tell us how we can help you.

I do not envy experiencing the pfSense learning-curve... but, we are happy to help after you've felt our pain. :)

Laughing, understand!