Netgate SG-1000 microFirewall

Author Topic: install 2.4.2 on Lanner NCA-1210  (Read 159 times)

0 Members and 1 Guest are viewing this topic.

Offline Kit

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
install 2.4.2 on Lanner NCA-1210
« on: January 15, 2018, 10:34:46 pm »
I am trying to install pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img
on Lanner NCA-1210. I tried the rufus or win32diskimager to burn the image on a USB flash drive. after booting the device, I got the following message.

Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key

I then insert the USB flash drive on another working pfsense type the following command

gpart set -a active da0


I put the USB drive back to the Lanner NCA-1210. The system able to boot the USB drive but stopped at mountroot>

Thank you for any suggestions.

--------------------------------------------------------------------------------

uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x8087 product 0x07db> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <STT FPN032C2RM 1.104.07> ACS-2 ATA SATA 3.x device
ada0: Serial Number S983553-FQPB-827H003
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 28626MB (58626288 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <Unknown > at usbus0 (disconnected)
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.

Loader variables:
  vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
  vfs.root.mountfrom.options=ro,noatime

Manual root filesystem specification:
  <fstype>:<device> [options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:tank
        cd9660:/dev/cd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line>    Abort manual input

mountroot>

Offline conor

  • Jr. Member
  • **
  • Posts: 29
  • Karma: +4/-0
    • View Profile
Re: install 2.4.2 on Lanner NCA-1210
« Reply #1 on: January 24, 2018, 10:10:39 am »
on your usb memstick what is the contents of /boot/loader.conf

You may need to explicitily set a value there to:
vfs.root.mountfrom="ufs:/dev/da0a"