Netgate SG-1000 microFirewall

Author Topic: FreePBX and Pfsense NAT problem.  (Read 122 times)

0 Members and 1 Guest are viewing this topic.

Offline rvoosterhout

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
FreePBX and Pfsense NAT problem.
« on: January 29, 2018, 03:16:54 pm »
Hi everybody,

I'm trying to get a remote extension to work with my FreePBX, through my PfSense router, but I don't get connected and I have no idea what i'm missing.
I added all the required open ports, which automatically created all my firewall rules. As remote client, i'm using Zoiper on a android phone. It's set to connect to my external IP addres with either port 5060 or 5160, but both no connection possible.
The Responsive Firewall in FreePBX is set to accept pjsip and chansip. When I register Zoiper with my local IP of my PBX, i have a correct registration immediately.

Attached you will find 2 screenshots. One of my NAT rules,one of my firewall rules and one of the firewall in FreePBX.

NAT

Firewall

FreePBX Responsive Firewall


Thanks a lot!

Offline Derelict

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 9817
  • Karma: +1107/-311
    • View Profile
Re: FreePBX and Pfsense NAT problem.
« Reply #1 on: January 29, 2018, 11:03:16 pm »
I would use a VPN for that.
Las Vegas, Nevada, USA
Use this diagram to describe your issue.
The pfSense Book is now available for just $24.70!
Do Not PM For Help! NO_WAN_EGRESSTM