Netgate SG-1000 microFirewall

Author Topic: Cannot allocate memory - The line in question reads  (Read 120 times)

0 Members and 1 Guest are viewing this topic.

Offline DRago_Angel

  • Jr. Member
  • **
  • Posts: 67
  • Karma: +4/-0
    • View Profile
Cannot allocate memory - The line in question reads
« on: February 01, 2018, 06:06:44 am »
Error itself:
Code: [Select]
There were error(s) loading the rules: /tmp/rules.debug:53: cannot define table pfB_auto_db_blocklist: Cannot allocate memory - The line in question reads [53]: table <pfB_auto_db_blocklist> persist file "/var/db/aliastables/pfB_auto_db_blocklist.txt"If I delete this rule, it begin see errors on another rule.
Code: [Select]
pfSense Table Stats
-------------------
table-entries hard limit   400000
Table Usage Count         282827

pfSense 2.4.2-RELEASE-p1. pfBlockerNG 2.1.2_2. VM: CPU 2x2.4ghz, RAM 8gb and 4gb of them all time free.
This is IPv4 Rule, with 1 list, auto link https://lists.blocklist.de/lists/all.txt
cat /var/db/aliastables/pfB_auto_db_blocklist.txt do not show anomaly...
« Last Edit: February 01, 2018, 07:24:55 am by DRago_Angel »

Offline RonpfS

  • Hero Member
  • *****
  • Posts: 716
  • Karma: +96/-2
    • View Profile
Re: Cannot allocate memory - The line in question reads
« Reply #1 on: February 01, 2018, 01:14:10 pm »
Try to increase the Firewall Maximum Table Entries  under  System / Advanced / Firewall & NAT
2.3.5-RELEASE-p1 (amd64)
Intel Core2 Quad CPU Q8400 @ 2.66GHz 8GB
pfBlockerNG 2.1.2_2/Dev, suricata 4.0.3_1