Netgate SG-1000 microFirewall

Author Topic: Pfsense 2.4.2_1 stuck in boot loop  (Read 122 times)

0 Members and 1 Guest are viewing this topic.

Offline jnic

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-1
    • View Profile
Pfsense 2.4.2_1 stuck in boot loop
« on: February 06, 2018, 06:03:24 pm »
I was in the middle of doing things (specifically installing the openvpn client export package )on my pfsense router from the web ui. when it restarted all of a sudden, it seemed like it was taking a while to turn back on so i went and grabbed a monitor to plug into it, to see what was happening, and it would boot to pfsense do a massive text dump then just keep rebooting and doing the same thing.  I thought this could be the hard drive failing, so i grabbed a spare drive quickly installed pfsense in it so i could at least have an internet connection.  I had a backup of my pfsense configuration, but it was old, my question is is there a way i can get that configuration file from the hdd it still spins up, i did see a recover xml configuration, when i booted up the pfsense installer, how would i go about using that.

Offline necs-gungaro

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Pfsense 2.4.2_1 stuck in boot loop
« Reply #1 on: February 12, 2018, 11:09:13 am »
I had this same issue a few times and the only way we could remedy it , was by reinstalling pfsense back on the unit and we had the configurations saved on a server then loaded that config file and that fixed it. Just so long there are no hardware issues with your device.