Netgate SG-1000 microFirewall

Author Topic: Gateway - Send to Error 65  (Read 9094 times)

0 Members and 1 Guest are viewing this topic.

Offline ghkrauss

  • Full Member
  • ***
  • Posts: 144
  • Karma: +3/-1
    • View Profile
Gateway - Send to Error 65
« on: April 20, 2016, 08:03:44 am »
I am receiving send to error 65 as noted in the gateway logs. What might be the issue and solution.

Offline jimp

  • Administrator
  • Hero Member
  • *****
  • Posts: 21571
  • Karma: +1471/-26
    • View Profile
Re: Gateway - Send to Error 65
« Reply #1 on: April 26, 2016, 10:49:11 am »
Error 65 is 'no route to host', so it means you have no route to the gateway at that time. Either it's not in your subnet or somehow the interface doesn't have a route to its subnet, etc.

Since the WAN is DHCP, that could mean that it was handed a different address in a different subnet, perhaps from the modem itself.
Need help fast? Commercial Support!

Co-Author of pfSense: The Definitive Guide. - Check the Doc Wiki for FAQs.

Do not PM for help!

Offline luke1018

  • Jr. Member
  • **
  • Posts: 35
  • Karma: +1/-0
    • View Profile
Re: Gateway - Send to Error 65
« Reply #2 on: February 07, 2018, 02:35:42 am »
Hi so how can we resolve this issue? Do we need to change settings on the WAN to allowing monitoring on that ?