Netgate SG-1000 microFirewall

Author Topic: Stuck at BTX Loader  (Read 2415 times)

0 Members and 1 Guest are viewing this topic.

0xPIT

  • Guest
Stuck at BTX Loader
« on: May 26, 2010, 11:43:56 am »
Hello,

I'm using a Nexcom NSB1083 Board, pretty standard Intel System with CF Socket and 4x NIC.
I've dd'd a current 1.2.3 Image onto a CF. (did that before several times successfully)

Booting shows "BTX Loader 1.x...." after quite some time, nothing else happens.

Querying this forum, I found several suggestions to play with BIOS (HDD and ACPI) settings --
-- did that,  yields no result, still stuck at BTX Loder.

Also, I am unable to boot from CDROM with the same error.


Can anyone help me to boot my system or diagnose the issue?

Thank you,

 - Karl

Offline Efonne

  • Hero Member
  • *****
  • Posts: 627
  • Karma: +2/-0
    • View Profile
Re: Stuck at BTX Loader
« Reply #1 on: May 27, 2010, 04:39:01 am »
Those NanoBSD images currently only use a serial console and do not have VGA support.

0xPIT

  • Guest
Re: Stuck at BTX Loader
« Reply #2 on: June 02, 2010, 10:57:59 am »
Thanks, I'll try a Serial Terminal.

0xPIT

  • Guest
Re: Stuck at BTX Loader
« Reply #3 on: June 07, 2010, 11:02:23 am »
Those NanoBSD images currently only use a serial console and do not have VGA support.

That was, of course, the problem - thanks a lot!

Probably it would be nice to document that on the Download and Versions pages.