I live in HK and some ISP provides 1000Mbps broadband, recently I have upgraded to one of them.
On testing the throughput, directly connect my server to the modem, I can get the speed reach 900Mbps, which is pretty good.
While after passing through my router, Buffalo WZR-HP-G300NH, it drops to only 130Mbps.
This is understandable as I have studied a bit for the capability of router handling a large bandwidth, so I actually planned to build my a X86 router for the job.
As planned, my router will be using either Atom D525(D2700 if available in a short moment) or AMD E-350 as CPU which is embedded onboard;
together with the lan port with Realtek controller, additionally an Intel Pro 1000 CT will be installed; RAM will be 2 or 4GB depends on budget; WiFi will be settled by using an USB WiFi adapter.
However, I do not know if the above set up would really suffice the need.
I have discussed with my friends that they guarantee the above set up will be enough, but rarely I can see someone testing this bandwidth on a X86 router.
Also, which router software is suggested? I heard MikroTik RouterOS is one of the best available but it costs, I want to suppress the cost of the router to <$179 USD.
Reading from m0n0wall's doc, it won't use more than 64MB RAM on my regardless of loading.......will this be an issue at all?
Recently I planned to give ClearOS a shot, do you have any idea on its possible performance?
The spec maybe as below(subjected to change as none was bought except the NIC)
CPU : Intel Atom D525/D2700/Celeron G440
Ram : Kingston DDR3 1333 2G~4GB
Storage : Flash Drive/Harddisk
NIC : Using Atom boards-Realtek 8111X, Using Intel H61 Board-Intel 82579V; and another Intel Pro 1000 CT
If you have more ideas on the spec, please feel free to let us know.
Thank you so much for your attention.
*This post was first made on Anandtech forums, after the reminder of the members, I realize that I should ask it on a more suitable location like a Router OS community, thus forwarded here. You may refer to the below link for some previous discussion, thank you.http://forums.anandtech.com/showthread.php?t=2207926