The pfSense Store

Author Topic: Configuration for Insteon Hub connectivity - $50  (Read 1506 times)

0 Members and 1 Guest are viewing this topic.

Offline mountainmanwill

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Configuration for Insteon Hub connectivity - $50
« on: September 25, 2015, 09:55:33 pm »
Asking for detailed help getting communication to work to Insteon Hub from WAN. I have wireshark captures. Have access to other diagnostic tools and reports.

using PFSense v 2.2.4, freebsd 10.1, release p-15
comcast ISP

Insteon Hub 4.8a
Insteon Hub model 2242-222

Understand and followed port forward rules to direct Insteon Hub traffic from WAN on port 25105 to Host Insteon Hub at LAN IP 192.168.0.51 also on port 25105.

Using iPhone app to connect to Insteon Hub for lighting control. This works while connected to WiFi inside the PFSense. Does not work on WiFi or mobile ISP outside PFSense.

Network config:

ISP Cable Modem
    |
    |
    |
 PFSense
    |
    |
    |
   LAN----Insteon Hub, Other nodes, iPads etc

This should not be difficult. PFSense is a great platform that is easy to use. Seems like I'm missing something simple. Asking for help because after much searching and testing I can't seem to get this to work.

The wireshark packet trace shows communication seems to fail at the HTTP GET call.

Thank you in advance for any pointers in the right direction.
« Last Edit: September 26, 2015, 10:33:50 am by mountainmanwill »