pfSense Forum

pfSense English Support => General Questions => Topic started by: TommyL on February 07, 2018, 07:29:43 pm

Title: SSH tunnel with putty very slow
Post by: TommyL on February 07, 2018, 07:29:43 pm
Hi!

I use putty to create a SSH tunnel to the pfsense SSH server, to circumvent a restrictive firewall. It works good, but I get very slow speeds. Speed without tunnel is about 100/100 mb...but over the tunnel only 3/3 mb. Tested with Firefox, Chrome and WinSCP file transfers.

Is there anything I can do to make it faster? Can the firewall be throttling ssh connections? I'm running a I5 5250U with 4GB ram. About 5% CPU load when i test, so hardware should not be the problem...? Also not using port 22.

Best Regards

TommyL
Title: Re: SSH tunnel with putty very slow
Post by: muppet on February 08, 2018, 12:18:24 pm
I've just tested this myself and I get great performance via a SSH port forward/tunnel.

I'm using PuTTY to do my port forwarding under windows, you don't say what you're using. EDIT: Sorry, you say right there in the subject.

Regardless, I don't think the problem is pfSense.  I have a similar machine, i5 5250U but my pfSense is virtualised on it, so it should be even slower theoretically.

I would examine the following:

It might also be that the restrictive firewall is limiting SSH traffic.

Hope this helps (Though I realise how annoying "works for me!" posts are)
Title: Re: SSH tunnel with putty very slow
Post by: TommyL on February 08, 2018, 12:30:53 pm
Thanks muppet. So it should be working better, good to get this confirmed. I suspect the firewall, but i will do some testing as you suggests. :)