Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - vanthoi

Pages: [1]
General Questions / Multicast IPTV for ISP FPT VietNamese
« on: January 01, 2018, 02:49:25 pm »
I use the FPT network in Vietnam, which uses PPOE to provide IPTV. Previously I used IKUAI or modem is still normal view. But since I switched to pFsense I can not use half.

I tried to find the tutorial at the forum and follow but failed. Most of them add an IPTV Wan and an IPTV LAN. Same service with IGMP Proxy. I only have 1 WAN and one LAN, I tried to add UDP and IGMP rules for LAN and WAN but all failed, the log logs the following error: The source address for group 239.255 .255.250, is not in any valid net for upstream VIF. As for the firewall I see the UDP part is all green.
Here is my list of IPTV lists:
In the upstream section I added,,
Downstream lan is

Got NAT port of UDP for wan 30120
But it still does not work.

Currently I can only watch the program through IPTV by plugging the line from converter into the switch then plugging the wan from the switch and Pfsense. Is there a way to fix this.

Thank you!

Ah.... Ok it worked.

Error due to previous I did not clear the browser cache, so it still crashes when I briefly translate other tags.

One time I thank you for reminding me!

The error was not caused by the number of out-of-frame tabs, due to the 6-letter convention for "System".
You can try to translate any words as long as you do not exceed 6 characters.
The other tabs I have translated in shorter words. But still not resolved the above error.
Although you guarantee 100% of all other cards do not exceed the frame limit.
But if the word "System" is longer than 6 characters, the style will break itself.

webGUI / How to translate the keyword "System" in the system language pack
« on: September 23, 2017, 05:20:59 am »
Hi everyone.

I am Vietnamese. I am working on translating the Pfsense language packs.
All is very good, only the word "System" I can not switch back to Vietnamese.
Because the word "System" contains 6 characters. If I translate more than 6 characters,
Access will break the interface.

Is there a way to translate the word "System" to be longer than 6 characters?

Thank you!

Pages: [1]