Netgate SG-1000 microFirewall

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Brutos

Pages: [1] 2
1
Hardware / Re: PF Sense 2.4 with Asrock J3455-ITX
« on: October 24, 2017, 08:14:30 am »
Just got this board and having the same issue on every reboot I have to start in safemode. I may have to reinstall and try the fix posted

2
pfBlockerNG / Re: pfBlockerNG v2.0 w/DNSBL
« on: March 02, 2017, 04:41:41 am »
Does anyone have a good list for blocking porn sites please?b

I have google and searched and cant find any.

3
Great will give this a test as i was looking for a way to stop using squid and squidguard

4
pfBlockerNG / Re: pfBlockerNG
« on: June 11, 2016, 04:22:58 pm »
Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.

If an IP is getting blocked, then you can either: 1) Suppress the IP from the Alerts Tab 2) Create a new pfBlockerNG alias (Whitelist), and add the IP to the customlist and set the format to "Permit Outbound". Ensure that the "Rule Order" places the Permit Rules, above the Block/Reject Rules.

If a domain is getting blocked by DNSBL, then you need to suppress it from the Alerts Tab.

Thanks I will try that. :)

5
pfBlockerNG / Re: pfBlockerNG
« on: June 11, 2016, 09:20:11 am »
Hope someone can help I have outbound deny selected on the IPV4 list below

Alias Name   Alias Description   Action   Frequency   Logging
IBlock   pfBlockerNG IBlock   Deny_Outbound   04hours   enabled   
 
PRI1   pfBlockerNG PRI1   Deny_Outbound   01hour   enabled   
 
PRI2   pfBlockerNG PRI2   Deny_Outbound   04hours   enabled   
 
PRI3   pfBlockerNG PRI3   Deny_Outbound   04hours   enabled   
 
SEC1   pfBlockerNG SEC1   Deny_Outbound   04hours   enabled   
 
TOR        pfBlockerNG TOR   Deny_Outbound   04hours   enabled   
 
MAIL   pfBlockerNG MAIL   Deny_Outbound   08hours   enabled   


Now I want to keep all the listed enabled but i keep getting some good sites blocked like dropbox.com.

Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.

6
Cache/Proxy / Re: SquidGuard Crash each time I update blacklist
« on: May 07, 2016, 06:44:10 am »
Thanks Guys for the help working fine now after update no errors. :) :)

7
Cache/Proxy / Re: SquidGuard Crash each time I update blacklist
« on: May 07, 2016, 04:06:14 am »
Same problem for me

Have you found any solutions yet?

8
Cache/Proxy / SquidGuard Crash each time I update blacklist
« on: May 06, 2016, 05:40:58 pm »
Hi,

I hope someone can help me i get this error message each time i update my Squidguard blacklis. Can someone tell me what is happening please?

Thanks




amd64
10.3-RELEASE
FreeBSD 10.3-RELEASE #6 05adf0a(RELENG_2_3_0): Mon Apr 11 18:52:07 CDT 2016     root@ce23-amd64-builder:/builder/pfsense-230/tmp/obj/builder/pfsense-230/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
 PHP Stack trace:
 PHP   1. {main}() /tmp/squidGuard_blacklist_update.sh:0
 PHP   2. sg_reconfigure_blacklist() /tmp/squidGuard_blacklist_update.sh:5
 PHP   3. sg_update_blacklist() /usr/local/pkg/squidguard_configurator.inc:2095
 PHP   4. squidguard_ramdisk() /usr/local/pkg/squidguard_configurator.inc:2131
 PHP   5. mkdir() /usr/local/pkg/squidguard_configurator.inc:1978

9
Installation and Upgrades / Re: 2.2.4 Crashes
« on: August 28, 2015, 06:34:29 am »
I will try that but if i have to end up removing both i may have to switch Firewalls then as web filtering is keep to my setup

10
Installation and Upgrades / 2.2.4 Crashes
« on: August 26, 2015, 07:09:21 am »
Hi,

I hope someone with more experience can assist me with my crashes. I constantly get crashes since 2.2.3 and now 2.2.4 i never got any crashes before.

My setup is
Gigabyte GA-C1037UN-EU
Built in Intel Dual-core Celeron 1037U processor (1.8 GHz)
4gd Ram
squid
dansguardian
bandwidthd
OpenVPN Client Export Utility


11
Hardware / Re: pfSense with Gigabyte GA-J1900N-D3V
« on: August 14, 2015, 02:14:22 pm »
Finally, do you recommend to use GA-C1037UN-EU (rev2) http://es.gigabyte.com/products/page/mb/ga-c1037un-eurev_20/overview/?

Am currently using this board and it works fine no issues at all.

12
Packages / Re: Sarg Reports Generation
« on: March 05, 2015, 05:02:38 pm »
Check the sample you copied. That is between two ` `
Yes thank you..attention to detail such an easy thing to miss.

Thanks its working now.

13
Packages / Re: Sarg Reports Generation
« on: March 03, 2015, 05:06:48 pm »
the screenshot show only one ` on date arg

So what should the argument be please?

Am a Novice with Sarg.

14
Packages / Re: Sarg Reports Generation
« on: March 03, 2015, 05:06:01 pm »
What happens if you delete the extra arguments?

When you mean extra arguments what exactly are you referring to please? Sorry for my ignorance.

15
Packages / Sarg Reports Generation
« on: March 03, 2015, 03:03:25 pm »
Hi Guys,

I hope someone could help me so i have Sarg installed on pfsense 2.2 with squid3 3.4.10_2 and squidguard-devel 1.5. Squid and squidGuard is working fine issue i am having is with Sarg not generating reports unless i run ( Sarg -x or Sarg) from the cli. Only then will it generate a report automatically. I have a schedule setup to run every day frequency 23h.

In the Logs i see this :

php-fpm[43966]: /pkg_edit.php: Sarg: force refresh now with -d `date +%d/%m/%Y args, compress(on) and none action after sarg finish.

php-fpm[43966]: /pkg_edit.php: The command 'export LC_ALL=C && /usr/pbi/sarg-amd64/bin/sarg -d `date +%d/%m/%Y' returned exit code '2', the output was ''

Settings



These are the reports generated by running the command manually via the CLI



Pages: [1] 2