pfSense Gold Subscription

Author Topic: Pfsense 2.3.3 hyperv Ovh  (Read 986 times)

0 Members and 1 Guest are viewing this topic.

Offline lolo54000

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Pfsense 2.3.3 hyperv Ovh
« on: March 07, 2017, 11:02:20 am »
Hi

I test to install pfsense on a hyper v  virtual machine on a OVH dedicated server

I configure my 2 network card one for wan and the other for my vrack .
I test to ping google from my console it's ok .

I need to remote configure pfsense .

I create a wan rules to enable remote acces for port 443. I enable logguing for this rules.
On my lan network i have no problem to connect to web configurator
When I test to remotly  connect to web configurator I have an error the page can't be displayed.
When I look in status/system logs/firewall I can see a line with a green check but I can't connect

Mar 7 17:54:48   WAN    Remote admin (1488406995)     109.xxx.xx.xx3:53280     51.xxx.xxx.142:443   TCP:S

can you tell me wath is my error?

Best Regards

Lolo

Offline andipandi

  • Jr. Member
  • **
  • Posts: 56
  • Karma: +0/-1
    • View Profile
Re: Pfsense 2.3.3 hyperv Ovh
« Reply #1 on: March 08, 2017, 01:32:29 pm »
So.. since you get the log entry, that means you definitely reach your pfSense? A hyper-v incoming networking misconfiguration is impossible then?

Since, it looks like you did do everything correctly, at least here only the firewall rule is mentioned https://doc.pfsense.org/index.php/How_can_I_access_the_webGUI_from_the_WAN .

As for me, when accessing the UI, I always do it via LAN, and if external, I use VPN LAN via OpenVPN. That is more cumbersome of course if you only want the web ui.

Offline lolo54000

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Pfsense 2.3.3 hyperv Ovh
« Reply #2 on: March 08, 2017, 02:25:47 pm »
Hi

Yes i can acces to my pfsense from my lan.
and from console i can ping google.com so for me my hyperv network config is ok no?

I test to acces web configurator from wan because all the rules that i test to create don't work. ( exemple : I test to redirect one port from wan to lan server but it dont work )

i create this rules to acces web configurator from wan:
Protocol                Source           Port   Destination   Port              Gateway   Queue   Schedule   Description   

IPv4 TCP   xxx.xxx.xxx.xxx     *   WAN address   443 (HTTPS)   *   none                       Remote admin


An idea?

Lolo
« Last Edit: March 08, 2017, 02:29:59 pm by lolo54000 »

Offline pgk

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: Pfsense 2.3.3 hyperv Ovh
« Reply #3 on: March 15, 2017, 12:31:17 am »
Stupid question from me -

When accessing pfsense from the LAN are you using HTTP or HTTPS?

pgk

Offline lolo54000

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: Pfsense 2.3.3 hyperv Ovh
« Reply #4 on: March 15, 2017, 02:52:22 am »
Hi

I use https from lan

For Wan I test with http or https but it don't work

Lolo

Offline instasafari

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Pfsense 2.3.3 hyperv Ovh
« Reply #5 on: July 31, 2017, 05:45:31 pm »
I test to access web configurator from wan because all the rules that i test to create don't work. ( exemple : I test to redirect one port from wan to lan server but it dont work )

Offline kapara

  • Hero Member
  • *****
  • Posts: 934
  • Karma: +15/-0
    • View Profile
Re: Pfsense 2.3.3 hyperv Ovh
« Reply #6 on: August 11, 2017, 05:20:53 pm »
I am running 5 dedicated servers all with virtual pfsense with hyper-v in OVH.  Did you buy a second IP?  Did you set the MAC address correctly on the pfsense virtual wan interface?  Did you add the commands to have the additional routes added to startup of pfsense?
Skype ID:  Marinhd