The pfSense Store

Author Topic: traffic Sharper Problem  (Read 2871 times)

0 Members and 1 Guest are viewing this topic.

Offline czappi

  • Jr. Member
  • **
  • Posts: 58
  • Karma: +0/-0
    • View Profile
traffic Sharper Problem
« on: November 17, 2005, 12:47:41 am »
Hallo

Habe folgendes problem.
Wenn ich Traffic sharper an meinen Wrap aktiviere über den wizard klappt alles soweit aber beim letzten schritt.
dann bekomme ich folgende medlungen.
Vorher wo ich den p2p rechner im lan hatte klappte es, aber der p2p rechner ist jetzt an dem opt1 interface angeschlossen
da klappte es nicht.

No source address found in rule No destination address found in rule 1 No destination address found in rule 3 No destination address found in rule 5 No destination address found in rule 7 No destination address found in rule 9 No destination address found in rule 11 No destination address found in rule 13 No destination address found in rule 15 No destination address found in rule 17 No destination address found in rule 21 No destination address found in rule 27 No destination address found in rule 29 No destination address found in rule 31 No destination address found in rule 33 No destination address found in rule 35 No destination address found in rule 37 No destination address found in rule 39 No destination address found in rule 41 No destination address found in rule 43 No destination address found in rule 45 No destination address found in rule 47 No destination address found in rule 49 No destination address found in rule 51 No destination address found in rule 53 No destination address found in rule 55 Warning: Cannot modify header information - headers already sent by (output started at /etc/inc/shaper.inc:481) in /usr/local/www/wizard.php(89) : eval()'d code on line 1

Either your LAN or WAN interface doesn't support ALTQ. The wizard cannot continue.

Konfiguration.

sis0: WAN
sis1: LAN
opt1: p2p rechner
ath0:WLAN

Wenn ich in Queues gehen zeigt er nur eine 1 und sie bleibt auf loading stehn unten restet drücken bring auch nicht.

Einstellung wizard.

Inside: OPT
Download: 6000 (glaube 6Mibit)
Outside: sis0
upload: 600

Hoffe ich habe hier keinen Fehler.



   
 

Offline hoba

  • Administrator
  • Hero Member
  • *****
  • Posts: 5837
  • Karma: +3/-0
  • What was the problem to this solution again?
    • View Profile
    • pfSense
Re: traffic Sharper Problem
« Reply #1 on: November 17, 2005, 02:47:38 pm »
Welche Version ist das? Das mit dem ALTQ-Fehler scheint eine Version zu sein, bei der der PPPoE-Treiber noch nicht ALTQ-kompatibel war. Die neueren Versionen unterstützen ALTQ über PPPoE.

Offline czappi

  • Jr. Member
  • **
  • Posts: 58
  • Karma: +0/-0
    • View Profile
Re: traffic Sharper Problem
« Reply #2 on: November 18, 2005, 01:21:19 pm »
Ist die 0.92 habe habe jetzt auf

Inside: LAN
Download: 6000
Outside:WAN
upload: 600

in den einstellung läuft es, wenn ich Inside auf opt1 schalte läuft es nicht.


Offline hoba

  • Administrator
  • Hero Member
  • *****
  • Posts: 5837
  • Karma: +3/-0
  • What was the problem to this solution again?
    • View Profile
    • pfSense
Re: traffic Sharper Problem
« Reply #3 on: November 18, 2005, 01:31:03 pm »
Ok, schaue ich mir an.

Offline hoba

  • Administrator
  • Hero Member
  • *****
  • Posts: 5837
  • Karma: +3/-0
  • What was the problem to this solution again?
    • View Profile
    • pfSense
Re: traffic Sharper Problem
« Reply #4 on: November 27, 2005, 05:59:27 pm »
Ich habe den Traffic shaper eben mit 0.94.14 (inoffiziell) mit WAN und OPT1 getestet. Scheint zu gehen. was für Probleme siehst Du genau?

Offline czappi

  • Jr. Member
  • **
  • Posts: 58
  • Karma: +0/-0
    • View Profile
Re: traffic Sharper Problem
« Reply #5 on: November 28, 2005, 12:22:56 am »
Wenn der Wizard durschgelaufen war habe ich beim beenden die folgende meldungen bekommen.

No source address found in rule No destination address found in rule 1 No destination address found in rule 3 No destination address found in rule 5 No destination address found in rule 7 No destination address found in rule 9 No destination address found in rule 11 No destination address found in rule 13 No destination address found in rule 15 No destination address found in rule 17 No destination address found in rule 21 No destination address found in rule 27 No destination address found in rule 29 No destination address found in rule 31 No destination address found in rule 33 No destination address found in rule 35 No destination address found in rule 37 No destination address found in rule 39 No destination address found in rule 41 No destination address found in rule 43 No destination address found in rule 45 No destination address found in rule 47 No destination address found in rule 49 No destination address found in rule 51 No destination address found in rule 53 No destination address found in rule 55 Warning: Cannot modify header information - headers already sent by (output started at /etc/inc/shaper.inc:481) in /usr/local/www/wizard.php(89) : eval()'d code on line 1

Either your LAN or WAN interface doesn't support ALTQ. The wizard cannot continue.