Netgate SG-1000 microFirewall

Author Topic: MiFi Novatel Wireless 5792 / AT&T Liberate support  (Read 80 times)

0 Members and 1 Guest are viewing this topic.

Offline bdf0506

  • Newbie
  • *
  • Posts: 12
  • Karma: +1/-0
    • View Profile
MiFi Novatel Wireless 5792 / AT&T Liberate support
« on: November 09, 2017, 05:24:43 pm »
I'm trying to get a Novatel Wireless 5792 device to work with PfSense. This device is also known as an AT&T Liberate device.

If I plug it into to my pfSense physical device running 2.4.1, it does in fact recognize it.

Code: [Select]
[2.4.1-RELEASE][root@pfSense.home]/dev: usbconfig -d ugen0.4 dump_device_desc
ugen0.4: <Novatel Wireless MiFi 5792> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0002  <Communication device>
  bDeviceSubClass = 0x0006
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x1410
  idProduct = 0xb009
  bcdDevice = 0x0228
  iManufacturer = 0x0001  <Novatel Wireless>
  iProduct = 0x0002  <MiFi 5792>
  iSerialNumber = 0x0003  <0123456789ABCDEF>
  bNumConfigurations = 0x0002

But when I go to add it under an Interface>PPP, it does not find it. All it finds under PPP interfaces is /deve/cuau0. It will detect that regardless of if the MiFi device is plugged in via USB to the pfSense or not.

Is there anything else that I need to do in order to enable support for this device?