The pfSense Store

Author Topic: re0 watchdog timeout [solved]  (Read 4096 times)

0 Members and 1 Guest are viewing this topic.

Offline cheshire_cat

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
re0 watchdog timeout [solved]
« on: October 29, 2015, 02:34:23 am »
 :'(
Hi,

Anyone ecounter watchdog timeout Issue?
When I download Files (28g) from server behind re0, the server beening unreachable after amount of time :(
I can still ping re0 interface but cannot ping devices behind re0.

my pfsense config:
pfsense 2.2.4
Asus J1900i-c
4GB Ram
Onboard realtek 8111g ------ re0
Intel dual port 82576 lan ---------- wan, lan

----------wan-----------------
------------|--------------------
--------pfsense---------------
----------|-----|----------------
----------|--- re0--------------
----------|-----|----------------
----------|--- n66u as AP----
----------|----------|-----------
----------|------Server--------
----------|----------------------
----------|-----------------------
--------Lan---------------------
----------|-----------------------
--------PC1---------------------



Appreciate for advise.
The syslog is full of watchdog timeout, re0 down, re0 up, loop

Code: [Select]
Oct 29 15:13:45 kernel: re0: watchdog timeout
Oct 29 15:13:45 kernel: re0: link state changed to DOWN
Oct 29 15:13:46 php-fpm[76217]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:13:49 check_reload_status: Linkup starting re0
Oct 29 15:13:49 kernel: re0: link state changed to UP
Oct 29 15:13:50 php-fpm[76217]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:13:50 check_reload_status: rc.newwanip starting re0
Oct 29 15:13:51 php-fpm[76217]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:13:51 php-fpm[76217]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:13:52 check_reload_status: Reloading filter
Oct 29 15:14:03 check_reload_status: Linkup starting re0
Oct 29 15:14:03 kernel: re0: watchdog timeout
Oct 29 15:14:03 kernel: re0: link state changed to DOWN
Oct 29 15:14:04 php-fpm[95478]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:07 check_reload_status: Linkup starting re0
Oct 29 15:14:07 kernel: re0: link state changed to UP
Oct 29 15:14:08 php-fpm[95478]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:08 check_reload_status: rc.newwanip starting re0
Oct 29 15:14:09 php-fpm[95478]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:14:09 php-fpm[95478]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:14:09 check_reload_status: Reloading filter
Oct 29 15:14:15 kernel: re0: watchdog timeout
Oct 29 15:14:15 kernel: re0: link state changed to DOWN
Oct 29 15:14:15 check_reload_status: Linkup starting re0
Oct 29 15:14:16 php-fpm[10433]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:19 check_reload_status: Linkup starting re0
Oct 29 15:14:19 kernel: re0: link state changed to UP
Oct 29 15:14:20 php-fpm[10433]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:20 check_reload_status: rc.newwanip starting re0
Oct 29 15:14:21 php-fpm[10433]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:14:21 php-fpm[10433]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:14:21 check_reload_status: Reloading filter
Oct 29 15:14:28 check_reload_status: Linkup starting re0
Oct 29 15:14:28 kernel: re0: watchdog timeout
Oct 29 15:14:28 kernel: re0: link state changed to DOWN
Oct 29 15:14:29 php-fpm[21700]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:33 kernel: re0: link state changed to UP
Oct 29 15:14:33 check_reload_status: Linkup starting re0
Oct 29 15:14:34 php-fpm[21700]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:34 check_reload_status: rc.newwanip starting re0
Oct 29 15:14:35 php-fpm[21700]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:14:35 php-fpm[21700]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:14:35 check_reload_status: Reloading filter
Oct 29 15:14:42 check_reload_status: Linkup starting re0
Oct 29 15:14:42 kernel: re0: watchdog timeout
Oct 29 15:14:42 kernel: re0: link state changed to DOWN
Oct 29 15:14:45 php-fpm[50727]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:46 check_reload_status: Linkup starting re0
Oct 29 15:14:46 kernel: re0: link state changed to UP
Oct 29 15:14:47 php-fpm[60064]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:47 check_reload_status: rc.newwanip starting re0
Oct 29 15:14:48 php-fpm[61592]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:14:48 php-fpm[61592]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:14:48 check_reload_status: Reloading filter
Oct 29 15:14:54 check_reload_status: Linkup starting re0
Oct 29 15:14:54 kernel: re0: watchdog timeout
Oct 29 15:14:54 kernel: re0: link state changed to DOWN
Oct 29 15:14:55 php-fpm[61592]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:58 check_reload_status: Linkup starting re0
Oct 29 15:14:58 kernel: re0: link state changed to UP
Oct 29 15:14:59 php-fpm[72879]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:14:59 check_reload_status: rc.newwanip starting re0
Oct 29 15:15:00 php-fpm[72879]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:15:00 php-fpm[72879]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:15:00 check_reload_status: Reloading filter
Oct 29 15:15:03 check_reload_status: Linkup starting re0
Oct 29 15:15:03 kernel: re0: watchdog timeout
Oct 29 15:15:03 kernel: re0: link state changed to DOWN
Oct 29 15:15:04 php-fpm[72879]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:15:07 check_reload_status: Linkup starting re0
Oct 29 15:15:07 kernel: re0: link state changed to UP
Oct 29 15:15:08 php-fpm[72879]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:15:08 check_reload_status: rc.newwanip starting re0
Oct 29 15:15:09 php-fpm[72879]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:15:09 php-fpm[72879]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:15:09 check_reload_status: Reloading filter
Oct 29 15:15:12 kernel: re0: watchdog timeout
Oct 29 15:15:12 kernel: re0: link state changed to DOWN
Oct 29 15:15:12 check_reload_status: Linkup starting re0
Oct 29 15:15:14 php-fpm[84806]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:15:16 check_reload_status: Linkup starting re0
Oct 29 15:15:16 kernel: re0: link state changed to UP
Oct 29 15:15:17 php-fpm[84806]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:15:17 check_reload_status: rc.newwanip starting re0
Oct 29 15:15:18 php-fpm[84806]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:15:18 php-fpm[84806]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:15:18 check_reload_status: Reloading filter
Oct 29 15:17:19 check_reload_status: Linkup starting re0
Oct 29 15:17:19 kernel: re0: watchdog timeout
Oct 29 15:17:19 kernel: re0: link state changed to DOWN
Oct 29 15:17:21 php-fpm[21182]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:17:23 check_reload_status: Linkup starting re0
Oct 29 15:17:23 kernel: re0: link state changed to UP
Oct 29 15:17:24 php-fpm[21182]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:17:24 check_reload_status: rc.newwanip starting re0
Oct 29 15:17:25 php-fpm[30297]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:17:25 php-fpm[30297]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:17:25 check_reload_status: Reloading filter
Oct 29 15:18:07 check_reload_status: Linkup starting re0
Oct 29 15:18:07 kernel: re0: watchdog timeout
Oct 29 15:18:07 kernel: re0: link state changed to DOWN
Oct 29 15:18:08 php-fpm[83035]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:18:11 check_reload_status: Linkup starting re0
Oct 29 15:18:11 kernel: re0: link state changed to UP
Oct 29 15:18:12 php-fpm[83035]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:18:12 check_reload_status: rc.newwanip starting re0
Oct 29 15:18:14 php-fpm[83035]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:18:14 php-fpm[83035]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:18:14 check_reload_status: Reloading filter
Oct 29 15:21:04 check_reload_status: Linkup starting re0
Oct 29 15:21:04 kernel: re0: watchdog timeout
Oct 29 15:21:04 kernel: re0: link state changed to DOWN
Oct 29 15:21:05 php-fpm[75201]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:21:08 check_reload_status: Linkup starting re0
Oct 29 15:21:08 kernel: re0: link state changed to UP
Oct 29 15:21:09 php-fpm[75201]: /rc.linkup: Hotplug event detected for OPT1(opt1) but ignoring since interface is configured with static IP (192.168.10.1 )
Oct 29 15:21:09 check_reload_status: rc.newwanip starting re0
Oct 29 15:21:10 php-fpm[75201]: /rc.newwanip: rc.newwanip: Info: starting on re0.
Oct 29 15:21:10 php-fpm[75201]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: OPT1[opt1]) (real interface: re0).
Oct 29 15:21:10 check_reload_status: Reloading filter
« Last Edit: November 01, 2015, 05:05:56 am by cheshire_cat »

Offline doktornotor

  • Hero Member
  • *****
  • Posts: 8553
  • Karma: +958/-278
  • Not a pfSense employee, they cannot fire me...
    • View Profile
Re: re0 watchdog timeout
« Reply #1 on: October 29, 2015, 03:57:11 am »
Advice == replace ShitTek NICs.
Do NOT PM for help!

Offline cheshire_cat

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: re0 watchdog timeout
« Reply #2 on: October 29, 2015, 08:11:25 am »
maybe you are right about that lol.
I just found some forum said that....it just a old issue from FreeBSD 8.X and now still exist on 9.X

Offline cheshire_cat

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #3 on: November 01, 2015, 05:14:23 am »
It seem solved after enabling Flow Control and Master on my re0 interface.

also need to add parameters in /boot/loader.conf
hw.re.msi_disable=1
hw.pci.enable_msix=0
hw.pci.enable_msi=0


I am not network expert, I dont know what these parameters but these two steps save my life. :D

PS. This steps also solved my old old old issue: network performance 50% of gigabit speed

Offline solo16

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #4 on: March 31, 2016, 11:21:21 am »
It seem solved after enabling Flow Control and Master on my re0 interface.

also need to add parameters in /boot/loader.conf
hw.re.msi_disable=1
hw.pci.enable_msix=0
hw.pci.enable_msi=0


I am not network expert, I dont know what these parameters but these two steps save my life. :D

PS. This steps also solved my old old old issue: network performance 50% of gigabit speed

Hi,
I'm also having the same problem I got frequent re0 (LAN) watchdog timeout issue, with the powerd off no such problem.

So, may I ask you how to enable the flowcontrol and master?

Thanks!

Offline cheshire_cat

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #5 on: April 26, 2016, 11:21:14 pm »
It seem solved after enabling Flow Control and Master on my re0 interface.

also need to add parameters in /boot/loader.conf
hw.re.msi_disable=1
hw.pci.enable_msix=0
hw.pci.enable_msi=0


I am not network expert, I dont know what these parameters but these two steps save my life. :D

PS. This steps also solved my old old old issue: network performance 50% of gigabit speed

Hi,
I'm also having the same problem I got frequent re0 (LAN) watchdog timeout issue, with the powerd off no such problem.

So, may I ask you how to enable the flowcontrol and master?

Thanks!



Interface -> "your realtek interface" -> Advanced


Offline Napsterbater

  • Jr. Member
  • **
  • Posts: 48
  • Karma: +3/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #6 on: December 08, 2016, 02:18:32 pm »
I'm having these issues, I have no "Native" interfaces though, they are all VLANs, any way to set this on the base interface?

Offline dotdash

  • Hero Member
  • *****
  • Posts: 1915
  • Karma: +99/-2
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #7 on: December 08, 2016, 04:06:02 pm »
You could do it with the shellcmd package.

Offline 80sricky

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #8 on: July 22, 2017, 05:46:24 am »
Hi apologise for resurrecting an old thread but how do you add the parameters to the boot\loader?

Thanks

Offline ptt

  • Hero Member
  • *****
  • Posts: 2282
  • Karma: +388/-46
    • View Profile

Offline Areomayo

  • Newbie
  • *
  • Posts: 2
  • Karma: +1/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #10 on: September 08, 2017, 06:55:38 pm »
The above did not solve my problem alone rather a combination.

What fixed it for me was uploading a compiled version of realtek driver 1.92 if_re.ko to /boot/kernel/ and in /boot/loeader.conf.local add the following line: if_re_load="YES" then reboot and wupti.

I also however tick the 3 Disable hardware offloadings in System - Advanced - Networking


Heres some links that helped me solve my issue including the compiled if_re.ko, i hope it helps others having same problem.
https://bugs.freenas.org/issues/1850
https://www.ateamsystems.com/tech-blog/freebsd-pfsense-link-state-re0-watchdog-timeout-errors/

Offline bgbird03

  • Newbie
  • *
  • Posts: 15
  • Karma: +0/-0
    • View Profile
Re: re0 watchdog timeout [solved]
« Reply #11 on: November 11, 2017, 07:29:07 pm »
The above did not solve my problem alone rather a combination.

What fixed it for me was uploading a compiled version of realtek driver 1.92 if_re.ko to /boot/kernel/ and in /boot/loeader.conf.local add the following line: if_re_load="YES" then reboot and wupti.

I also however tick the 3 Disable hardware offloadings in System - Advanced - Networking


Heres some links that helped me solve my issue including the compiled if_re.ko, i hope it helps others having same problem.
https://bugs.freenas.org/issues/1850
https://www.ateamsystems.com/tech-blog/freebsd-pfsense-link-state-re0-watchdog-timeout-errors/

How did you upload that compiled file to the /boot/kernel? I'm ready to do this and can't figure it out (I'm new to this -- obviously).

Thanks!