Netgate SG-1000 microFirewall

Author Topic: vLAN and Static Mapping  (Read 130 times)

0 Members and 1 Guest are viewing this topic.

Offline pfsensekeith

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
vLAN and Static Mapping
« on: December 31, 2017, 01:39:08 pm »
I am a noob at this.

I would like to have static addresses on my vLan.  Is that possible.  In my research all I could find was some guy who posted this:  "I obviously can't put a static mapping for the 192.168.70.0 subnet as it differs from the DHCP configured subnet of 192.168.1.0 and the GUI won't let me."  I was wondering if that is true.

My setup
LAN  192.168.4.1/24
vLan 192.168.50.1/24
dhcp is enabled for each.
rules are setup and the vlan is working fine handing out DHCP addresses.

in moving my wifi clients from the LAN to the vLan(DMZ) I have discovered that I cannot give static IP addresses to them on the vLan.  I would like to do this so I can set access rules that differ amongst the different clients.

Offline Derelict

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 10266
  • Karma: +1177/-313
    • View Profile
Re: vLAN and Static Mapping
« Reply #1 on: December 31, 2017, 02:08:52 pm »
What does VLAN mean to you? What did you do?
Las Vegas, Nevada, USA
Use this diagram to describe your issue.
The pfSense Book is now available for just $24.70!
Do Not PM For Help! NO_WAN_EGRESSTM