I have two ISP so two wan's and wanted to loadbanlance them with RC1 however I can ping both gateway's before I loadbalance. However when I activate loadblance and restart the gateway are not found so the loadbalance is not activated.
To activate the loadbalance I have to make the check IP the same as the PFsense IP however I don't get why my gateways are not pingable any more.
I have tried different approaches and different manuals for this however with no luck.
Then I have a problem with the stability of PFsense with loadbalance because it locks up the machine and only a hardreset will help. Because the filesystem might be damaged I had to reinstall PFsense a few times.
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.30 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::20c:76ff:fead:8e17%em0 prefixlen 64 scopeid 0x1
media: Ethernet autoselect (1000baseTX <full-duplex>)
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet XX.168.56.50 netmask 0xfffffff8 broadcast XX.168.56.55
inet6 fe80::2d0:b7ff:fe8f:7cf6%fxp0 prefixlen 64 scopeid 0x2
media: Ethernet autoselect (100baseTX <full-duplex>)
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20c:76ff:fead:8e16%em1 prefixlen 64 scopeid 0x3
inet XXX.241.60.186 netmask 0xfffffff8 broadcast XXX.241.60.191
media: Ethernet autoselect (10baseT/UTP <half-duplex>)
pfsync0: flags=41<UP,RUNNING> mtu 2020
pfsync: syncdev: lo0 maxupd: 128
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
pflog0: flags=100<PROMISC> mtu 33208