The pfSense Store

Author Topic: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE  (Read 108584 times)

0 Members and 1 Guest are viewing this topic.

Offline Ceria

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #210 on: December 09, 2011, 06:41:13 pm »
Muantep Tutornya Mas Bro tengkyu sanget  ;D

Offline Bidin

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #211 on: January 08, 2012, 12:40:10 pm »
Maaf agan2 master semua. Saya baru kenal pfsense ini baru seminggu "Masih Newbi". Saya sdh instal PFSense 2.0.1-RELEASE (i386)
built on Mon Dec 12 17:53:52 EST 2011
FreeBSD 8.1-RELEASE-p6

{pfSense-2.0.1-RELEASE-i386.iso.gz versi tgl 14 Des 2011}.

Saya sdh ikuti tahapan dari Omz anto_digit. Instal squid,SGuard, dan lusca. CP berjalan lancar dngan BW down 256 dan Up 64. Tp proxynya seperti tidak jalan (Padahal lihat di SERVICE semua status Running), karna setelah dites buka youtube dengan video yg sama di client lain tidak ada perubahan dengan client yg sebelumnya (tetap lama + buffer).

Dimanakah letak kesalahnnya??? mohon bantuannya dari master semua...... ;) ;)

tolong dikoreksi ....
[2.0.1-RELEASE][admin@pfsense.localdomain]/root(393): squidclient -p 80 mgr:info
HTTP/1.0 200 OK
Server: Lusca/LUSCA r14850 patched: chudy r14
Date: Sun, 08 Jan 2012 18:30:25 GMT
Content-Type: text/plain
Expires: Sun, 08 Jan 2012 18:30:25 GMT
X-Cache: MISS from localhost
Connection: close

Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time:     Sun, 08 Jan 2012 18:20:05 GMT
Current Time:   Sun, 08 Jan 2012 18:30:25 GMT
Connection information for squid:
        Number of clients accessing cache:      1
        Number of HTTP requests received:       1
        Number of ICP messages received:        0
        Number of ICP messages sent:    0
        Number of queued ICP replies:   0
        Request failure ratio:   0.00
        Average HTTP requests per minute since start:   0.1
        Average ICP messages per minute since start:    0.0
        Select loop called: 3259 times, 190.371 ms avg
Cache information for squid:
        Request Hit Ratios:     5min: 0.0%, 60min: 0.0%
        Byte Hit Ratios:        5min: 100.0%, 60min: 100.0%
        Request Memory Hit Ratios:      5min: 0.0%, 60min: 0.0%
        Request Disk Hit Ratios:        5min: 0.0%, 60min: 0.0%
        Storage Swap size:      0 KB
        Storage Mem size:       104 KB
        Mean Object Size:       0.00 KB
        Requests given to unlinkd:      0
Median Service Times (seconds)  5 min    60 min:
        HTTP Requests (All):   0.00000  0.00000
        Cache Misses:          0.00000  0.00000
        Cache Hits:            0.00000  0.00000
        Near Hits:             0.00000  0.00000
        Not-Modified Replies:  0.00000  0.00000
        DNS Lookups:           0.00000  0.00000
        ICP Queries:           0.00000  0.00000
Resource usage for squid:
        UP Time:        620.418 seconds
        CPU Time:       0.041 seconds
        CPU Usage:      0.01%
        CPU Usage, 5 minute avg:        0.01%
        CPU Usage, 60 minute avg:       0.01%
        Process Data Segment Size via sbrk(): 0 KB
        Maximum Resident Size: 2152 KB
        Page faults with physical i/o: 1
Memory accounted for:
        Total accounted:          174 KB
        memPoolAlloc calls: 2486
        memPoolFree calls: 1746
File descriptor usage for squid:
        Maximum number of file descriptors:   11095
        Largest file desc currently in use:     20
        Number of file desc currently in use:   12
        Files queued for open:                   0
        Available number of file descriptors: 11083
        Reserved number of file descriptors:   100
        Store Disk files open:                   0
        IO loop method:                     kqueue
Internal Data Structures:
            26 StoreEntries
            26 StoreEntries with MemObjects
            25 Hot Object Cache Items
             0 on-disk objects

dan saya cek chace.log

2012/01/08 22:41:52|    http://localhost/preload.php
2012/01/08 22:41:52| WARNING: Closing client 127.0.0.1 connection due to lifetime timeout
2012/01/08 22:41:52|    http://localhost/preload.php
2012/01/08 22:41:52| WARNING: Closing client 127.0.0.1 connection due to lifetime timeout
2012/01/08 22:41:52|    http://localhost/preload.php
2012/01/08 22:41:52| Closing unlinkd pipe on FD 19
2012/01/08 22:41:52| storeDirWriteCleanLogs: Starting...
2012/01/08 22:41:52|   Finished.  Wrote 0 entries.
2012/01/08 22:41:52|   Took 0.0 seconds (   0.0 entries/sec).
CPU Usage: 4.067 seconds = 2.666 user + 1.401 sys
Maximum Resident Size: 120356 KB
Page faults with physical i/o: 2
2012/01/08 22:41:52| Open FD              10 /var/squid/log/cache.log
2012/01/08 22:41:52| Squid Cache (Version LUSCA r14850 patched: chudy r14): Exiting normally.
2012/01/09 01:19:59| Starting Squid Cache version LUSCA r14850 patched: chudy r14 for i386-portbld-freebsd8.0...
2012/01/09 01:19:59| Process ID 48453
2012/01/09 01:19:59| With 11095 file descriptors available
2012/01/09 01:19:59| Using kqueue for the IO loop
2012/01/09 01:19:59| Adding nameserver 127.0.0.1 from squid.conf
2012/01/09 01:19:59| DNS Socket created at 0.0.0.0, port 54617, FD 11
2012/01/09 01:19:59| helperOpenServers: Starting 3 'squidGuard' processes
2012/01/09 01:19:59| helperOpenServers: Starting 1 'storeurl.pl' processes
2012-01-09 01:20:01 [48843] (squidGuard): can't write to logfile /var/log/squidGuard.log
2012-01-09 01:20:01 [48953] (squidGuard): can't write to logfile /var/log/squidGuard.log
2012-01-09 01:20:01 [48807] (squidGuard): can't write to logfile /var/log/squidGuard.log
2012-01-09 01:20:01 [48807] New setting: logdir: /var/squidGuard/log
2012-01-09 01:20:01 [48807] New setting: dbhome: /var/db/squidGuard
2012-01-09 01:20:01 [48953] New setting: logdir: /var/squidGuard/log
2012-01-09 01:20:01 [48953] New setting: dbhome: /var/db/squidGuard
2012-01-09 01:20:01 [48843] New setting: logdir: /var/squidGuard/log
2012-01-09 01:20:01 [48843] New setting: dbhome: /var/db/squidGuard
2012/01/09 01:19:59| Unlinkd pipe opened on FD 19
2012/01/09 01:19:59| Swap maxSize 0 + 16384 KB, estimated 1260 objects
2012/01/09 01:19:59| Target number of buckets: 63
2012/01/09 01:19:59| Using 8192 Store buckets
2012/01/09 01:19:59| Max Mem  size: 16384 KB
2012/01/09 01:19:59| Max Swap size: 0 KB
2012/01/09 01:19:59| Store logging disabled
2012/01/09 01:19:59| Using Least Load store dir selection
2012/01/09 01:19:59| Current Directory is /etc
2012/01/09 01:19:59| Loaded Icons.
2012/01/09 01:20:02| Accepting transparently proxied HTTP connections at 127.0.0.1, port 80, FD 17.
2012/01/09 01:20:02| Accepting SNMP messages on port 3401, FD 18.
2012/01/09 01:20:02| Ready to serve requests.
2012/01/09 01:20:02| Finished rebuilding storage from disk.
2012/01/09 01:20:02|         0 Entries scanned
2012/01/09 01:20:02|         0 Invalid entries.
2012/01/09 01:20:02|         0 With invalid flags.
2012/01/09 01:20:02|         0 Objects loaded.
2012/01/09 01:20:02|         0 Objects expired.
2012/01/09 01:20:02|         0 Objects cancelled.
2012/01/09 01:20:02|         0 Duplicate URLs purged.
2012/01/09 01:20:02|         0 Swapfile clashes avoided.
2012/01/09 01:20:02|   Took 2.3 seconds (   0.0 objects/sec).
2012/01/09 01:20:02| Beginning Validation Procedure
2012/01/09 01:20:02|   Completed Validation Procedure
2012/01/09 01:20:02|   Validated 0 Entries
2012/01/09 01:20:02|   store_swap_size = 0k
2012/01/09 01:20:02| WARNING: url_rewriter #3 (FD 14) exited
2012/01/09 01:20:02| WARNING: url_rewriter #2 (FD 13) exited
2012/01/09 01:20:02| Too few url_rewriter processes are running
2012/01/09 01:20:02| storeDirWriteCleanLogs: Starting...
2012/01/09 01:20:02|   Finished.  Wrote 0 entries.
2012/01/09 01:20:02|   Took 0.0 seconds (   0.0 entries/sec).
FATAL: The url_rewriter helpers are crashing too rapidly, need help!

Squid Cache (Version LUSCA r14850 patched: chudy r14): Terminated abnormally.
CPU Usage: 0.012 seconds = 0.012 user + 0.000 sys
Maximum Resident Size: 2044 KB
Page faults with physical i/o: 1
2012/01/09 01:20:05| Starting Squid Cache version LUSCA r14850 patched: chudy r14 for i386-portbld-freebsd8.0...
2012/01/09 01:20:05| Process ID 18525
2012/01/09 01:20:05| With 11095 file descriptors available
2012/01/09 01:20:05| Using kqueue for the IO loop
2012/01/09 01:20:05| Adding nameserver 127.0.0.1 from squid.conf
2012/01/09 01:20:05| DNS Socket created at 0.0.0.0, port 20745, FD 11
2012/01/09 01:20:05| helperOpenServers: Starting 3 'squidGuard' processes
2012-01-09 01:20:05 [18541] (squidGuard): can't write to logfile /var/log/squidGuard.log
2012-01-09 01:20:05 [18541] New setting: logdir: /var/squidGuard/log
2012-01-09 01:20:05 [18541] New setting: dbhome: /var/db/squidGuard
2012-01-09 01:20:05 [18570] (squidGuard): can't write to logfile /var/log/squidGuard.log
2012-01-09 01:20:05 [18570] New setting: logdir: /var/squidGuard/log
2012-01-09 01:20:05 [18570] New setting: dbhome: /var/db/squidGuard
2012/01/09 01:20:05| helperOpenServers: Starting 1 'storeurl.pl' processes
2012-01-09 01:20:05 [18639] (squidGuard): can't write to logfile /var/log/squidGuard.log
2012-01-09 01:20:05 [18639] New setting: logdir: /var/squidGuard/log
2012-01-09 01:20:05 [18639] New setting: dbhome: /var/db/squidGuard
2012/01/09 01:20:05| Unlinkd pipe opened on FD 19
2012/01/09 01:20:05| Swap maxSize 0 + 16384 KB, estimated 1260 objects
2012/01/09 01:20:05| Target number of buckets: 63
2012/01/09 01:20:05| Using 8192 Store buckets
2012/01/09 01:20:05| Max Mem  size: 16384 KB
2012/01/09 01:20:05| Max Swap size: 0 KB
2012/01/09 01:20:05| Store logging disabled
2012/01/09 01:20:05| Using Least Load store dir selection
2012/01/09 01:20:05| Current Directory is /etc
2012/01/09 01:20:05| Loaded Icons.
2012/01/09 01:20:05| Accepting transparently proxied HTTP connections at 127.0.0.1, port 80, FD 17.
2012/01/09 01:20:05| Accepting SNMP messages on port 3401, FD 18.
2012/01/09 01:20:05| Ready to serve requests.
2012/01/09 01:20:05| Finished rebuilding storage from disk.
2012/01/09 01:20:05|         0 Entries scanned
2012/01/09 01:20:05|         0 Invalid entries.
2012/01/09 01:20:05|         0 With invalid flags.
2012/01/09 01:20:05|         0 Objects loaded.
2012/01/09 01:20:05|         0 Objects expired.
2012/01/09 01:20:05|         0 Objects cancelled.
2012/01/09 01:20:05|         0 Duplicate URLs purged.
2012/01/09 01:20:05|         0 Swapfile clashes avoided.
2012/01/09 01:20:05|   Took 0.3 seconds (   0.0 objects/sec).
2012/01/09 01:20:05| Beginning Validation Procedure
2012/01/09 01:20:05|   Completed Validation Procedure
2012/01/09 01:20:05|   Validated 0 Entries
2012/01/09 01:20:05|   store_swap_size = 0k
2012/01/09 01:20:06| storeLateRelease: released 0 objects
2012/01/09 01:28:57| CACHEMGR: <unknown>@127.0.0.1 requesting 'info'
2012/01/09 01:30:25| CACHEMGR: <unknown>@127.0.0.1 requesting 'info'

Mohon Bantuannya apa dan dimana letak kesalahannya..... ??? ??? ???

Offline lurri

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #212 on: January 09, 2012, 07:33:45 am »
waktu install pfsense pastikan berjalan normal semuwa.. termasuk config ip wan dan lan.

saran posisi modem modem bridge dial liwat mesin kecuali load balancing 1 modem mode bridge, satunya lagi dhcp atau static.

squid -> pastikan berjalan normal.
squid guard sekalian config pastikan berjalan normal -> restat -> pastikan berjalan normal.
lusca -> pastikan berjalan normal -> cek squid guard kalu stop, start lalu save -> cek dan pastikan berjalan normal -> lalu restat.

cek lagi klo masih ada yang tidak running berarti kesalan pada install squid pertama kali...

pengistalan squid saya anggap sudah running semua, sekarang terserah mau di tambah item-itemnya.
lihat dan pastikan versinya suport atau tidak ke 2.0 atau 2.0.1

NB:
*kalau mau update squid atau ada updatan terbaru hati-hati soalnya sebelum di restat baik-baik saja sehabis di restat config langsung eror bakkan tidak bisa satart up.

*kalau mau restat jangan langsung tombol restat, atau power bisa-bisa ada file korup atau hilang.

*restat atau matikan masin proxy pfsense harus melaui prosedur.


good job all ^_^ n selamat mencoba ( Bisa Itu Karena Terbiasa )

Offline anto_DIGIT

  • Full Member
  • ***
  • Posts: 270
  • Terima : Install / perbaikan /customisasi pfsense
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #213 on: January 09, 2012, 09:40:32 am »
Maaf agan2 master semua. Saya baru kenal pfsense ini baru seminggu "Masih Newbi". Saya sdh instal PFSense 2.0.1-RELEASE (i386)
built on Mon Dec 12 17:53:52 EST 2011
FreeBSD 8.1-RELEASE-p6

2012/01/09 01:20:02| Beginning Validation Procedure
2012/01/09 01:20:02|   Completed Validation Procedure
2012/01/09 01:20:02|   Validated 0 Entries
2012/01/09 01:20:02|   store_swap_size = 0k
2012/01/09 01:20:02| WARNING: url_rewriter #3 (FD 14) exited
2012/01/09 01:20:02| WARNING: url_rewriter #2 (FD 13) exited
2012/01/09 01:20:02| Too few url_rewriter processes are running
2012/01/09 01:20:02| storeDirWriteCleanLogs: Starting...
2012/01/09 01:20:02|   Finished.  Wrote 0 entries.
2012/01/09 01:20:02|   Took 0.0 seconds (   0.0 entries/sec).
FATAL: The url_rewriter helpers are crashing too rapidly, need help!

Squid Cache (Version LUSCA r14850 patched: chudy r14): Terminated abnormally.
CPU Usage: 0.012 seconds = 0.012 user + 0.000 sys
Maximum Resident Size: 2044 KB
Page faults with physical i/o: 1

Mohon Bantuannya apa dan dimana letak kesalahannya..... ??? ??? ???


jalankan, melalui webgui --- >
Diagnostic-command prompt
Execute Shell command
./package.sh off
execute

ligthsquid - squidguard - lusca - dan squid coba diuninstall semua melalui webgui ...

lalu cek melalui command shell :

pkg_info

jika masih ada paket diatas, uninstall secara manual

pkg_delete -rv namapaket

hapus juga termasuk paket perl ...

Kemudian ulangi install ulang sesuai urutan :
1. squid 2.7 ---> pastikan jalan
2. ligthsquid ---> pastikan jalan
3. squidguard ---> pastikan jalan
4. lusca ---> pastikan jalan

Offline Bidin

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #214 on: January 09, 2012, 09:09:56 pm »
Thanks semuanya. Tp aku sdh install ulang pfsense dr awal. Settingan yg lalu sdh hancur stelah saya OPREK "Maklum blm tau sok maen oprek" he..he..he...

Maaf bung anto_DIGIT. Klo utk pfsense 2.0.1 ketika install kernel tidak ada pilihan "uniprocessor kernel (one processor) tp hanya ada 3 pilihan :
1. Symetric Multyprocess....
2. Embedded kernel....
3. Developer kernel....
Saya pilih yang no. 1 (Symetric...) apakah installan ini tdk berpengaruh terhadap hasil instalasinya karna saya memakai mesin

Proc core2duo E7500
Asus P5KPL AMSE
DDR2 1 GB
HD Seagate 80 GB SATA

Mohon infonya...... Terima kasih

Offline Bidin

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #215 on: January 09, 2012, 09:30:44 pm »
Maaf bung anto_DIGIT. ada lg yg mau saya tanyakan....

Bgaimana cara mengecek satu persatu = Squid, Light Squid, Squidguard dan Lusca sudah berjalan????
Apakah hanya melihat tampilan di STATUS ---> SERVIS atau dari mana lg ??

Mohon tutorial dan petunjuknya.  Trima kasih  BRAVO PFSENSE....... :D :D

Offline jundi49

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #216 on: January 10, 2012, 12:56:39 am »
Mas Anto, mohon bantuannya

Saya pake pfsense 2.0 release, Dual Wan, WAN untuk browsing dan lain lain sedang OPT hanya untuk game
Sy update dari room mas, firewall rule, nat, alias dan ts pake yg tgl 18 nopember dan update pfsense yg tgl 31 okt.

Setelah itu sy pisahkan gatewaynya seperti di bawah ini,
Nah pertanyaan saya,
game tetap masih terganggu linenya padahal sudah terpisah bahkan ketika line opt putus game masih bisa jalan, seperti game LS dan lainnya baik saat download dgn idm bahkan video jg terganggu gamenya, padahal tdak ada saya set FO dan LB.

Mohon bantuannya mas Anto.  Jadi gmn sebenarnya misahin antara game dan lainnya agar game tidak pake line sendiri dan tidak terganggu dgn  yg lain.
Mohon pencerahan mas.

Dan ini status log saya

Jan 10 09:58:31    dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory.
Jan 10 09:58:31    dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory.
Jan 10 09:58:31    check_reload_status: Updating all dyndns
Jan 10 09:58:32    dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory.
Jan 10 09:58:32    dnsmasq[45734]: started, version 2.55 cachesize 10000
Jan 10 09:58:32    dnsmasq[45734]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP
Jan 10 09:58:32    dnsmasq[45734]: reading /etc/resolv.conf
Jan 10 09:58:32    dnsmasq[45734]: using nameserver 8.8.4.4#53
Jan 10 09:58:32    dnsmasq[45734]: using nameserver 8.8.8.8#53
Jan 10 09:58:32    dnsmasq[45734]: ignoring nameserver 127.0.0.1 - local interface
Jan 10 09:58:32    dnsmasq[45734]: ignoring nameserver 127.0.0.1 - local interface
Jan 10 09:58:32    dnsmasq[45734]: read /etc/hosts - 2 addresses
Jan 10 09:58:33    php: : OpenNTPD is starting up.
Jan 10 09:58:35    check_reload_status: Restarting ipsec tunnels
Jan 10 09:58:37    php: : Creating rrd update script
Jan 10 09:58:38    php: : Restarting/Starting all packages.
Jan 10 09:58:38    php: : process "proxy_monitor.sh" running at ""
Jan 10 09:58:38    php: : squid config synchronized
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidcache of squid because some include files are missing.
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidnac of squid because some include files are missing.
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidtraffic of squid because some include files are missing.
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidupstream of squid because some include files are missing.
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidauth of squid because some include files are missing.
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidusers of squid because some include files are missing.
Jan 10 09:58:38    php: : Not calling package sync code for dependency squidcache of squid because some include files are missing.
Jan 10 09:58:40    squid[37942]: Squid Parent: child process 38239 started
Jan 10 09:58:43    check_reload_status: Syncing firewall
Jan 10 09:58:43    php: : process "proxy_monitor.sh" running at ""
Jan 10 09:58:43    php: : squid config synchronized
Jan 10 09:58:43    squid[38239]: The url_rewriter helpers are crashing too rapidly, need help!
Jan 10 09:58:43    squid[37942]: Squid Parent: child process 38239 exited due to signal 6
Jan 10 09:58:43    kernel: pid 38239 (squid), uid 62: exited on signal 6
Jan 10 09:58:45    php: : process "proxy_monitor.sh" running at "53754 /bin/sh /usr/local/etc/rc.d/proxy_monitor.sh "
Jan 10 09:58:45    php: : process "squid -D" running at "37942 /usr/local/sbin/squid -D "
Jan 10 09:58:45    php: : The command '/usr/local/sbin/squid -k reconfigure' returned exit code '1', the output was 'squid: ERROR: Could not send signal 1 to process 38239: (3) No such process'
Jan 10 09:58:45    check_reload_status: Reloading filter
Jan 10 09:58:45    php: : squid config synchronized and squid reconfigured
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidcache of lusca-cache because some include files are missing.
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidnac of lusca-cache because some include files are missing.
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidtraffic of lusca-cache because some include files are missing.
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidupstream of lusca-cache because some include files are missing.
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidauth of lusca-cache because some include files are missing.
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidusers of lusca-cache because some include files are missing.
Jan 10 09:58:45    php: : Not calling package sync code for dependency squidcache of lusca-cache because some include files are missing.
Jan 10 09:58:46    squid[37942]: Squid Parent: child process 57414 started
Jan 10 09:58:50    php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
Jan 10 09:58:51    login: login on ttyv0 as root
Jan 10 09:58:52    check_reload_status: Reloading filter
Jan 10 09:59:29    apinger: Error while feeding rrdtool: Broken pipe
Jan 10 09:59:29    apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s.




Mohon bantuannnya juga mas Anto, di atas ada log pfsense, saya lihat ada error, error apaan itu mas ?
Dan ada yg aneh juga di pfsense saya, saya selalu cek Dashboard, Disk usage mengapa menurun, pernah 21 % tapi sekarang menjadi 16 %. Mengapa demikian ?

Mohon bantuannya
Terima kasih

Terima kasih
« Last Edit: January 10, 2012, 04:53:37 am by jundi49 »

Offline anto_DIGIT

  • Full Member
  • ***
  • Posts: 270
  • Terima : Install / perbaikan /customisasi pfsense
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #217 on: January 10, 2012, 03:05:30 am »
1. Symetric Multyprocess....
2. Embedded kernel....
3. Developer kernel....
Betul no 1.

Offline anto_DIGIT

  • Full Member
  • ***
  • Posts: 270
  • Terima : Install / perbaikan /customisasi pfsense
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #218 on: January 10, 2012, 03:08:47 am »
Maaf bung anto_DIGIT. ada lg yg mau saya tanyakan....

Bgaimana cara mengecek satu persatu = Squid, Light Squid, Squidguard dan Lusca sudah berjalan????
Apakah hanya melihat tampilan di STATUS ---> SERVIS atau dari mana lg ??

Mohon tutorial dan petunjuknya.  Trima kasih  BRAVO PFSENSE....... :D :D

squid ... ya dari status-service ...
ligthsquid ... seharusnya reportnya keluar
squidguard ... ya yg terblok mestinya terblok ...

Offline anto_DIGIT

  • Full Member
  • ***
  • Posts: 270
  • Terima : Install / perbaikan /customisasi pfsense
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #219 on: January 10, 2012, 06:33:23 am »
Mas Anto, mohon bantuannya

Saya pake pfsense 2.0 release, Dual Wan, WAN untuk browsing dan lain lain sedang OPT hanya untuk game
Sy update dari room mas, firewall rule, nat, alias dan ts pake yg tgl 18 nopember dan update pfsense yg tgl 31 okt.

Setelah itu sy pisahkan gatewaynya seperti di bawah ini,
Nah pertanyaan saya,
game tetap masih terganggu linenya padahal sudah terpisah bahkan ketika line opt putus game masih bisa jalan, seperti game LS dan lainnya baik saat download dgn idm bahkan video jg terganggu gamenya, padahal tdak ada saya set FO dan LB.


queue utk game jangan dikosongkan, nanti masuknya ke default ... default disitu prioritasnya dan BWnya kecil

Offline distorsi

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #220 on: January 12, 2012, 11:03:42 am »
permisi...
sebelumnya saya berterimakasih atas tutor yg telah diberikan oleh pak Anto_DIGIT, sangat membantu...
saya terapkan tutor tersebut di PFsense 2.0.1 Release AMD64

tapi saya mendapati sedikit masalah...
awalnya mesin dapat online stabil sekitar 1 bulan yang lalu, namun kemarin mendadak mesin menjadi tidak stabil,
sering HALT tiba2, saya coba cekdi bios, smw temperatur normal, di bawah 45 derajat, linw voltage pun tidak ada masalah,
kemudian saya kembali jalankan mesin pfsense, berhasil online, saya cek d dashboard, RAM masih dalam batas wajar, tidak sampai memakan resource swap, dan hardisk masih lega, namun mesin hanya mampu bertahan selama 1 jam kurang lebih.
lalu saya coba untuk fresh reinstall PFsense, namun masalah yg sama kembali muncul,
saya sudah coba tukar RAM, Hardsik dan PSU dari komputer lain, namun masalah yg sama tetap tidak teratasi,
mohon pencerahannya.

Offline anto_DIGIT

  • Full Member
  • ***
  • Posts: 270
  • Terima : Install / perbaikan /customisasi pfsense
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #221 on: January 13, 2012, 04:27:23 am »

Offline distorsi

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #222 on: January 13, 2012, 05:45:01 am »
Update untuk pfsense 2.0.1
http://code.google.com/p/pfsense-zph/downloads/list

jika setelah saya updateke patch untuk 2.0.1 masalah masih belum teratasi, apakah berarti trouble pada mesin pfsense saya ada pada hardwre?

Offline jundi49

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #223 on: January 15, 2012, 12:45:26 am »
Mas Anto, mohon bantuannya

Saya pake pfsense 2.0 release, Dual Wan, WAN untuk browsing dan lain lain sedang OPT hanya untuk game
Sy update dari room mas, firewall rule, nat, alias dan ts pake yg tgl 18 nopember dan update pfsense yg tgl 31 okt.

Setelah itu sy pisahkan gatewaynya seperti di bawah ini,
Nah pertanyaan saya,
game tetap masih terganggu linenya padahal sudah terpisah bahkan ketika line opt putus game masih bisa jalan, seperti game LS dan lainnya baik saat download dgn idm bahkan video jg terganggu gamenya, padahal tdak ada saya set FO dan LB.


queue utk game jangan dikosongkan, nanti masuknya ke default ... default disitu prioritasnya dan BWnya kecil

Gimana cara buat queenya mas anto,
ini saya ga pake TS, pernah sy coba buat ts  yg seperrti mas, kok di log banyak error, sy buat ts wan  sama dengan ts untuk opt. Apakah semua quee yg di rule lan itu kan berdasarkan TS? jika ga pake TS gmn ? Mohon pencerahan mas anto. Dan gmn sih cara pemisahan line yg benar agar game tidak terganggu dengan yg lain. Mohon bantuan mas anto.
ini graph aneh, besar kali pemakaian bw opt, padahal hanya untuk game
« Last Edit: January 16, 2012, 09:04:39 pm by jundi49 »

Offline Bidin

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: [TUTOR] OPTIMASI PFSENSE 2.0 UTK HOTSPOT-WARNET/GAME ONLINE
« Reply #224 on: January 15, 2012, 10:37:07 pm »
Bung Anto. Saya mo tanyakan Mengapa Captive Portal apabila di enable melimit proxy server  ??? ??? ?? (Saya set Down 256 dan Upl 64)

Saya menggunakan
2.0.1-RELEASE (i386)
built on Mon Dec 12 17:53:52 EST 2011
FreeBSD 8.1-RELEASE-p6

Saya Jg sdh mengupdate pake PFSense 2.0.1 yg bung anto posting/berikan tgl 13 Jan 2012.
Firewall Rule, Trafik Shapper, dan Aliases saya gunakan dari bung Anto Tgl 18 Nov 2011.

Tolong di Cek Omz Anto_DIGIT

[2.0.1-RELEASE][admin@pfsense.bidin.co.id]/root(4): squidclient -p 80 mgr:info
HTTP/1.0 200 OK
Server: Lusca/LUSCA r14850 patched: chudy r14
Date: Mon, 16 Jan 2012 04:32:40 GMT
Content-Type: text/plain
Expires: Mon, 16 Jan 2012 04:32:40 GMT
X-Cache: MISS from localhost
Connection: close

Squid Object Cache: Version LUSCA r14850 patched: chudy r14
Start Time:     Mon, 16 Jan 2012 03:55:49 GMT
Current Time:   Mon, 16 Jan 2012 04:32:40 GMT
Connection information for squid:
        Number of clients accessing cache:      0
        Number of HTTP requests received:       473
        Number of ICP messages received:        0
        Number of ICP messages sent:    0
        Number of queued ICP replies:   0
        Request failure ratio:   0.00
        Average HTTP requests per minute since start:   12.8
        Average ICP messages per minute since start:    0.0
        Select loop called: 54921 times, 40.250 ms avg
Cache information for squid:
        Request Hit Ratios:     5min: 34.8%, 60min: 23.5%
        Byte Hit Ratios:        5min: 41.1%, 60min: 90.1%
        Request Memory Hit Ratios:      5min: 0.0%, 60min: 2.7%
        Request Disk Hit Ratios:        5min: 25.0%, 60min: 72.1%
        Storage Swap size:      121676 KB
        Storage Mem size:       644 KB
        Mean Object Size:       149.66 KB
        Requests given to unlinkd:      0
Median Service Times (seconds)  5 min    60 min:
        HTTP Requests (All):   0.03066  0.20843
        Cache Misses:            0.07409  0.25890
        Cache Hits:               0.00815  0.00678
        Near Hits:                 0.01847  0.04277
        Not-Modified Replies:  0.00179  0.00179
        DNS Lookups:            0.00000  0.00000
        ICP Queries:              0.00000  0.00000
Resource usage for squid:
        UP Time:        2210.580 seconds
        CPU Time:       4.171 seconds
        CPU Usage:      0.19%
        CPU Usage, 5 minute avg:        0.04%
        CPU Usage, 60 minute avg:       0.19%
        Process Data Segment Size via sbrk(): 0 KB
        Maximum Resident Size: 15680 KB
        Page faults with physical i/o: 3
Memory accounted for:
        Total accounted:         1019 KB
        memPoolAlloc calls: 128231
        memPoolFree calls: 118615
File descriptor usage for squid:
        Maximum number of file descriptors:   11095
        Largest file desc currently in use:     27
        Number of file desc currently in use:   19
        Files queued for open:                   0
        Available number of file descriptors: 11076
        Reserved number of file descriptors:   100
        Store Disk files open:                   0
        IO loop method:                     kqueue
Internal Data Structures:
           839 StoreEntries
           161 StoreEntries with MemObjects
           160 Hot Object Cache Items
           813 on-disk objects

dan Squi.conf

# Do not edit manually !
http_port 127.0.0.1:80 transparent
icp_port 0

pid_filename /var/run/squid.pid
cache_effective_user proxy
cache_effective_group proxy
error_directory /usr/local/etc/squid/errors/English
icon_directory /usr/local/etc/squid/icons
visible_hostname localhost
cache_mgr admin@localhost
access_log /var/squid/log/access.log
cache_log /var/squid/log/cache.log
cache_store_log none
shutdown_lifetime 0 seconds
# Allow local network(s) on interface(s)
acl localnet src  192.168.0.0/255.255.255.0
forwarded_for transparent
via off
uri_whitespace strip
dns_nameservers 127.0.0.1

cache_mem 16 MB
maximum_object_size_in_memory 4 KB
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA

cache_dir aufs /var/squid/cache 50000 16 256
minimum_object_size 0 KB
maximum_object_size 256 MB
offline_mode off
cache_swap_low 90
cache_swap_high 95

# No redirector configured



# Setup some default acls
acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1/255.255.255.255
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901  3128 1025-65535
acl sslports port 443 563
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
acl partialcontent_req req_header Range .*
acl mallware url_regex "/usr/local/etc/squid/mallware.url"
acl conficker url_regex "/usr/local/etc/squid/conficker.url"

#acl dynamic urlpath_regex cgi-bin \?
include /usr/local/etc/squid/tunning.conf
#cache deny dynamic
http_access allow manager localhost

http_access deny mallware
http_access deny conficker
http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

# Always allow localhost connections
http_access allow localhost

quick_abort_min 32 KB
quick_abort_max 128 KB
quick_abort_pct 75
range_offset_limit 0 MB
request_body_max_size 0 allow all
reply_body_max_size 0 deny all

# Custom options
zph_mode tos
zph_local 0x04
zph_parent 0
zph_option 136
redirect_program /usr/local/bin/squidGuard -c /usr/local/etc/squidGuard/squidGuard.conf
redirector_bypass on
redirect_children 3

# Allow local network(s) on interface(s)
http_access allow localnet

# Default block all to be sure
http_access deny all

Mohon dibantu letak kesalahan configurasi saya dan Bgmana Solusinya??
Makasih banyak sebelumya :) :)